Specifications
DESCRIPTION
-Metal construction with various finishes identified by suffix
-1/2" IPS connections will accept standard ball nose connection for 3/8” tubing
-Optional hot and cold temperature indicators available
-Hydrolock™ quick connect installation
-Includes metal
-For use with S948 valve
-Designed to be installed through 3,
OPERATION
-Lever style handles
-Maximum handle rotation angle is 90˚ to full on for either handle
-Rotate hot side handle counterclockwise to open and clockwise to close
-Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
-Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
-1224 cartridge design with nonmetallic/nonferrous and stainless steel materials
STANDARDS
-Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein
-Certified to ANSI/NSF 61/9
-Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
-ADA for lever handles
WARRANTY
-Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
-5 year warranty if used in commercial installations
DIVINE™
Two-Handle Widespread
Lavatory Faucet Trim
Models: TS458 series
Valve: S948
8” (203mm) - 16” (406mm)
centers
Spout Escutcheon Dia.
Handle Escutcheon Dia.3-13/32”(121mm)
Max Deck Thickness |
(32mm) |
QUICK CONNECT
HOSE ASSEMBLY
Lift
Rod
NOTE: FOR DECK THICKNESS
M•pact™ System
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 6/08 | FOR MORE INFORMATION CALL: |
| www.moen.com |