Hans Grohe DP Lift 2 M 20 manual Cleaning Instruction English

Page 18

Cleaning Instruction

English

Cleaning Recommendation for Hansgrohe Products

Modern sanitary tapware, kitchen mixers and showers consist of very different materials to comply with the needs of the market with regard to design and functionality.

To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning.

Cleaning Materials for Mixers and Showers

Acids are necessary ingredients of cleaning materials for removing lime, however please pay attention to the following points when clea- ning mixers and showers:

Only use cleaning material which is explicitly provided for this type of application, such as Hansgrohe’s Decalcifying Agent (A), which is available through the specialist sanitary trade.

Never use cleaning materials, which contain hydrochloric, formic or acetic acid, as they cause considerable damage.

Phosphoric acid is also restricted as it can cause damage.

Never mix any cleaning material with another.

Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads or micro fibre cloths.

Cleaning Instructions for Mixers and Showers

Please follow the cleaning material manufacturer’s instructions. In addition pay attention to the following points:

Clean the mixers and showers as and when required

The cleaning dosage and time the cleaner needs to take effect should be adjusted according to the product and the cleaner should not be left longer than necessary.

Regular cleaning can prevent calcification.

When using spray cleaner, spray first into a cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.

After cleaning rinse thoroughly with clean water to remove any cleaner residue.

Important

Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using. If the surface is already damaged, the effect of cleaning materials will cause further damage.

Damage caused by improper treatment will not be covered by our guarantee.

A

 

Rubit

 

Quiclean

 

 

 

Cleaning the hand and

Cleaning the hand-shower

head shower

 

Handshower with “Qui-

With the manual cleaning

clean”,thecleaningfunction

function “Rubit”, jet for-

against calcinations. When

mer

calcinations

can

the jet types are changed,

be

removed by

simple

small cleaning pins remove

rubbing.

 

the calcinations.

18

Image 18 Contents
Installation Instruction Contents Fitting items Panel Packing ListWall / Corner Installation Dimensions Diagram Panel Dimensions Flow capacity at 44 psi Fittings / Technical DataMaintenance Flow heaterFitting Items / Water Connections Overview Wall Installation DimensionsWall Installation Adjustment Thermostatic mixer please see SW 13 mmSW10 mm Ø6 mm Corner Installation 24 mm 17 mm Thermostat Setting / Safety Function Thermostat SettingTrouble Shooting EnglishExchanging lateral shower head Spare Parts 29 x 2,5 25 x 23 xCleaning Instruction English Cleaning Recommendation for Hansgrohe ProductsWarranty Limited Lifetime Consumer Warranty