CUE Instructions, Trouble Shooting, Specifications

CUE INSTRUCTIONS

1.To start the play at a point other than the beginning of a track, follow these instructions:

First choose the track you wish to play, and then press the PLAY/ PAUSE BUTTON (7) so the unit goes into the play mode. Press the PLAY/PAUSE BUTTON (7) to pause play at the spot where you want the play to start the CUE POINT. Use the SCAN BUTTONS (8) to pick the precise spot you want play to begin, then press the PLAY/ PAUSE BUTTON (7) again to save the cue point. Press the CUE BUTTON (5) to pause play at the cue point (the unit will go into the pause mode and the location indicated on the display will be the memorized cue point). You can preview the cue point by pressing and holding down the CUE BUTTON (5). Press the PLAY/PAUSE BUTTON (7) to begin play from the cue point.

2.Once you have saved a cue point you can fine tune or change the memorized cue point:

To change a cue point, push the PLAY/PAUSE BUTTON (7) so the unit plays from the cue point, then press the PLAY/PAUSE BUTTON

(7) at the spot you wish your new cue point. Press the PLAY/PAUSE BUTTON (7) again to save the cue point. The unit will go into the pause mode and the location indicated on the display will be the new memorized cue point.

To fine tune a cue point, pause play at the memorized cue point, then use the SCAN BUTTONS (8) to scan frame by frame (1/75th of a second) to where you want play to begin. Press the PLAY/PAUSE BUTTON (7) to save the new cue point.

Note: During fine tuning there will be a stutter effect (to help you find the beat). The stuttering effect will end when you press the PLAY/PAUSE BUTTON (7) to save the cue point. Also, during fine tuning if you hold down the SCAN BUTTONS (8), the unit will scan quickly after 10 frames.

TROUBLE SHOOTING

•If the disk will not play, check to see if the disc was loaded correctly (label side up). Also check the disc for excessive dirt, scratches, etc.

•If the disc turns but there is no sound, check the cable connections. If they are okay, check your amplifier or receiver.

•If the CD skips, check the CD for dirt or scratches. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. Before sending the unit in for repair, try playing a CD that you are sure plays properly.

SPECIFICATIONS

GENERAL:
Type		Compact	Disc	Player
Disc Type		Standard Compact discs (12 cm & 8 cm)
Time Display	Track Elapsed, Track Remain, or Total remain
Variable Pitch				+/- 16%
Pitch Bend				+/- 16%
Start		Within	0.02	seconds
Track Selection			1 to 99 Tracks
AUDIO SECTION:
Quantization		1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate				8 Times
Sampling Frequency			44.1 kHz
Frequency Response		20 Hz to		20 kHz
Digital Output				IEC958
Total Harmonic Distortion			Less Than 0.05%
Signal to Noise	Ratio			>96 dB
Dynamic Range				>94 dB
Output Level (nominal)			1.9 Volts R.M.S.
Power Supply		AC 120/230V, 60/50 Hz
Dimensions		19” x 10.5” x 3.5” (483 x 267 x 90 mm)
Weight			9 lbs. (4 kg)

*Specifications and design are subject to change without notice for purpose of improvement.

Page 4

CD-110 specifications

The Gemini CD-110 is a highly regarded compact disc player that epitomizes quality sound reproduction and user-friendly features, making it a popular choice among audiophiles and casual listeners alike. With its sleek design and robust build, the CD-110 not only appeals aesthetically but also promises durability and reliability.

One of the standout features of the Gemini CD-110 is its advanced Digital to Analog Converter (DAC), which ensures that audio playback is crisp and detailed. This high-performance DAC plays a pivotal role in converting digital audio signals into analog for your speakers, providing an exceptionally clear sound that allows users to fully appreciate the nuances in their favorite tracks.

In addition to superior sound quality, the Gemini CD-110 supports a wide range of CD formats including standard CDs, CD-Rs, and CD-RWs, offering versatility in playback options. This feature allows users to enjoy their extensive music collections without being limited by format compatibility. Furthermore, the player includes a programmable memory function, enabling users to create custom playlists and enjoy music in their preferred order.

Another notable technology incorporated into the CD-110 is its anti-shock mechanism, which minimizes playback interruptions caused by vibrations. This is particularly valuable for users who may employ the device in busy or active environments. The Gemini CD-110 also boasts a user-friendly interface, complete with an intuitive remote control for easy navigation.

On the connectivity front, the Gemini CD-110 features standard output options, including RCA outputs, which ensure compatibility with most audio systems. Additionally, it includes a headphone jack, allowing for personal listening without disturbing others—a great feature for late-night music sessions.

Overall, the Gemini CD-110 combines quality sound with convenient features in a compact package. Its intuitive controls, wide format support, and modern technologies make it a superb choice for anyone looking to enhance their audio experience. Whether in a home setup or as part of a portable music solution, the Gemini CD-110 delivers reliable performance and impressive sound quality that is sure to impress.