|
|
|
|
|
| Specifications | |
|
|
|
|
|
| Upright Posts: Stamped and Formed 16 Gauge Steel - Q’ty 4 |
|
| Construction Materials | Side Sway Bars: Tubular Steel |
|
| L - Shaped Safety Pins and Other Hardware: Zinc Plated Steel |
| |
|
| Shelves: Stamped and Formed Steel |
|
| Maximum Weight per | 600 lb |
|
| Shelf |
| |
|
|
| |
| Shelving Section |
| |
| Dimensions |
| |
|
|
| |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Set Up Instructions
Read the entire Important Safety Instructions section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly.
1.NOTE: Use two persons to assemble this Storage Rack. The Upright Posts
(2) are directional, the slots must face inward (see Figure 2 on page 5).
Long Rod (8)
Upright Post (2)
Nut (5)
Short Rod (3)
Long Rod (8)
Cross Beam (6)
Figure 1
2.Assemble two of the Upright Posts (2) using three of the horizontal Short Rods (3), and two of the Long Rods (8). Use six Bolts (1), twelve Flat Washers (4),
SKU 97563 | For technical questions, please call | Page |