Assembly
1.Flush pipe lines thoroughly.
2.Place the mixer including the sealing washer in position on the sink.
3.Slip the slide washer, washer and collar nut over the flexible hoses and threaded base and tighten the collar nut by hand.
4.Tighten screws.
5.Connect the flexible supply hoses to the angle valves:
|
| Large differences in pressure between the hot and | |
|
| cold water supply should be balanced. | |
|
| Operation |
|
|
| Turn on by lifting handle. |
|
|
| Swivel to the left: hot water |
|
|
| Swivel to the right: cold water. |
|
|
| Technical Data |
|
|
| Operating pressure: | max. 147 psi |
|
| Recommended operating press.: | 14.7 - 72.5 psi |
|
| Test pressure: | 232 psi |
hot | cold | Hot water temperature: | max. 176° F |
Recommended hot water temp.: | 149° F | ||
|
| Hole size in deck: |
|
|
| Minimum: | 1 1/4" |
|
| Maximum: | 1 3/8" |
4