Atlona AT-H2H-88M, AT-H2H-44M user manual Panel Description, Front Panel

Panel Description

Front Panel

1

AT-H2H-88M

2	3			4
		1	2	3	4
ENTER	POWER	5	6	7	8
FUNCTION CANCEL		DEFAULT	ALL	MEMORY	EDID

5 6 A B CD

1.IR Receiver Window - Receives the signal from the included IR remote control or a 3rd party controler.

2.Power Button - Cycles the power between On (blue backlight) or Standby (red backlight) mode.

3.Enter Button - Use to view current status for inputs and outputs or to confirm a command.

4.Number buttons - Use these buttons to select input and output paths or use with the function button to change matrix settings.

5.Function Button - Select for command options. (blue backlight when selected)

A.Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)

B.All: Save a single input to all the outputs with this function.

C.Memory: Save/load the current input and output route to memory.

D.EDID: Save/Load EDIDs to individual inputs.

Note: Default setting for EDID is the highest common HD resolution of all connected devices. (i.e. if you have resolutions ranging 720p, 1080i, and 1080p then 720p would be the default resolution for all connected displays.)

6.Cancel Button - Within the functions menu use to go back one screen or to the home screen.

Note: You cannot power off or change functions unless you go to the home screen.

IR

The IR receiver window can sometimes pick up stray reflected IR commands causing loss of functionality. To disable the front panel, see directions below:

home screen

AT-H2H-XXM	--->
Select Input Number

--->	Select Function Option	--->	Hold for
			5 seconds

--->	Select IR 1:On 2: Off
	Current: On/Off

---> --------------------

--->

--->

--->

Select IR 1: On 2: Off Current On

Select IR 1: On 2: Off Current off

--->Feedback=

”IR On Selected”

--->Feedback=

”IR Off Selected”

atlona.com	4	Toll free: 1-877-536-3976
		Local: 1-408-962-0515