American Standard 2733 WASHER/NUT Deep Socket Tool Screwdriver, Install Toilet, Install Tank

Page 3

6

BOLT CAP

CLOSET FLANGE

INSTALL TOILET

a.Position toilet squarely to wall and, with a rocking motion, press bowl down fully on wax ring and flange. Alternately tighten nuts until toilet is firmly seated on floor.

!CAUTION:

DO NOT OVERTIGHTEN NUTS

OR BASE MAY BE DAMAGED!

b.Install caps on washers.

(If necessary, cut bolt height to size before installing caps.)

c.Smooth off the bead of sealant around base. Remove excess sealant.

WASHER

NUT CLOSET BOLT

7

 

RUBBER

TANK MTG.

GASKET

BOLTS PRE-

 

INSTALLED

 

MTG.

RIBS

WASHER/NUT

INSTALL TANK

Recommended tool: Deep socket tool included in tank kit.

a.Install large rubber gasket over threaded outlet on bottom of tank and lower tank onto bowl so that tapered end of gasket fits evenly into bowl water inlet opening, and tank mounting bolts go through mounting holes. Secure with metal washer/nuts. Use the included deep socket tool to help get nuts started on bolts.

b.With tank parallel to wall, alternately tighten hex nuts keeping tank even and level until tank contacts both front and rear bowl mounting ribs. Do not tighten any further.

WASHER/NUT

DEEP SOCKET TOOL

SCREWDRIVER

DEEP

 

SOCKET

SCREWDRIVER

TOOL

!CAUTION: DO NOT OVERTIGHTEN NUTS MORE THAN REQUIRED FOR A SNUG FIT! DO NOT SPIN BOLTS INSIDE TANK WITH A SCREWDRIVER

8INSTALL TOILET SEAT Install toilet seat in accordance with manufacturer's directions.

9a

Before continuing, determine the type of water supply connection you have from the chart below and use the appropriate assembly parts

 

required to properly reconnect the water supply. DO NOT use plumber's putty to seal these fittings.

 

METAL/COPPER

METAL FLANGED

METAL SPIRAL

VINYL/BRAIDED

FLARED TUBING

 

TUBING

TUBING

CONNECTOR

LOCK NUT

 

LOCK NUT

LOCK NUT

LOCK NUT

CONE

 

EXISTING

EXISTING

COUPLING

 

WASHER

WASHER

 

CONE

NUT

COUPLING

 

EXISTING

WASHER

 

 

 

 

NUT

 

COUPLING

COUPLING

 

 

 

NUT

NUT

 

WATER

 

WATER

WATER

WATER

SHUT-OFF

 

SHUT-OFF

SHUT-OFF

SHUT-OFF

These parts must be used as illustrated

Use existing

Use existing spiral cone

Captive cone

to insure water-tight connection. Use of

coupling nut

washer. Fluidmaster

washers already

existing coupling nut may result in water

and washer.

cone washer may not

included. No

leakage. Water supply tube or pipe

 

 

seal completely on

additional washers

must extend at least 1/2" inside

 

 

spiral type supply line.

needed.

threaded shank of valve (does not apply

 

 

 

to flanged tubing).

 

 

 

 

CAUTION: DO NOT USE CONE WASHER WITH PLASTIC SUPPLY LINE.

CAUTION: Overtightening of LOCK NUT or COUPLING NUT could result in breakage and potential flooding.

!WARNING: Do not use plumber’s putty, pipe dope, or any other sealant on the water supply connection to this tank. If the connection leaks after hand tightening, replace the supply line. If the connection continues to leak with the new supply line, replace the fill valve.

Warranty is void if any type of sealant is used on the water supply connection.

- 3 -

730529-100 Rev. U

Image 3
Contents Recommended Tools and Materials V E F O R F U T U R E U S ERemove OLD Toilet Position Toilet on Flange DimensionsInstall Closet Bolts Install WAX Seal ModelDo not Overtighten Nuts Or Base MAY be Damaged Install ToiletInstall Tank WASHER/NUT Deep Socket Tool ScrewdriverDo not Overtighten Care and CleaningDescription Repair Parts ListTroubleshooting Troubleshooting Guide
Related manuals
Manual 5 pages 49.78 Kb Manual 6 pages 18.71 Kb

2369, 3404, 2585, 2738, 2625 specifications

American Standard is a renowned name in the bathroom and kitchen fixtures industry, consistently known for producing high-quality products that blend functionality, aesthetics, and durability. Among its range of offerings, models like 2733, 2627, 2792, 2367, and 2076 stand out due to their innovative features and design characteristics.

The American Standard 2733 is a soaking tub designed to provide a luxurious bath experience. With its spacious interior and sloped backrest, it allows users to fully immerse themselves in water, promoting relaxation. Made from durable acrylic, it resists scratches and stains, ensuring longevity. The tub’s sleek design can fit seamlessly into modern or traditional bathrooms alike.

Moving on to the 2627 model, this is a combination of an undermount sink and countertop, designed with functionality and elegance in mind. The smooth surface is easy to clean and comes in various finishes to suit any kitchen or bathroom decor. This model features a high backsplash to prevent water from splashing, showcasing a thoughtful design that prioritizes user convenience.

The American Standard 2792 is a two-piece toilet that marries efficiency with comfort. It features a powerful flushing system that uses less water while maximizing performance, making it environmentally friendly. The elongated bowl design provides extra comfort, and it comes with an elongated seat for added convenience. With a sleek, modern look, this toilet complements various bathroom styles while ensuring superior hygiene and functionality.

The 2367 model is one of the brand’s signature lavatory sinks, known for its versatility and craftsmanship. It comes in multiple designs, including pedestal and wall-mounted options, making it suitable for any bathroom size. The sink is made from durable vitreous china, which makes it resistant to wear and tear. Its spacious basin provides ample washing area, and the stylish design enhances the overall aesthetic of the bathroom.

Lastly, the American Standard 2076 is a corner whirlpool tub designed to optimize space while providing a spa-like experience. Its strategically placed jets offer a soothing massage effect, promoting relaxation after a long day. The compact design fits snugly into corner spaces, allowing homeowners to maximize their bathroom layout without compromising on comfort.

Together, these models represent American Standard’s commitment to quality, design, and user-friendly technology, making them a popular choice among consumers seeking reliable and stylish fixtures for their homes.