American Standard 641, 403, 404 Pedestal installation, BTop of Pedestal, Anchor Screw Installation

Page 2

1. Pedestal installation

1-A

Provide suitable reinforcement behind finished wall for lavatory mounting screws.

*Determine horizontal center line location of support from fixture.

NOTE: If replacing an existing sink be certain to shut off water supply before removing old sink.

C/L of 2X6

Support

*

Finished

Floor

1-F

Following manufacturer's instructions, install faucet and drain assembly (not included). Be certain to apply a bead of sealing putty on the underside of the drain (area "A") in order to ensure a watertight seal between the lavatory and drain. Remove excess putty after installing drain on lavatory.

1-G

1-BTop of Pedestal

Approx. Bumper locations to raise the lavatory slab left side.

For example only

Place lavatory and pedestal into installed position. Level and square the lavatory and pedestal assembly. Use one or more bumper cushions to level and cushion lavatory slab to pedestal.

1-CMark lavatory and pedestal screw locations through the mounting holes.

1-D

Remove lavatory and pedestal from installed position. Drill pilot holes for lavatory and pedestal anchor screws or lag bolts.

Return the fitted lavatory to the

 

installed position. Connect trap to

C

drain assembly hand tight to check

 

alignment. It may be necessary to

B

cut off part of the tailpiece (area

 

"B") or part of the horizontal leg of

 

the trap (area "C").

 

1-H

 

Secure lavatory to wall as

 

shown in 1E. Install washers

 

and hand tighten nuts or lag

 

bolts. Level and square the

 

unit. Connect hot and cold

 

supply lines to the shut-off

 

valves. Tighten trap joints for

Shut-Off

watertight assembly.

 

Valves

Note: Some models are supplied with lag bolts, anchor screws, or steel hangers for lavatory installations only. Other models and all pedestals are not provided with mounting hardware. Various pedestal screw sizes and types are available to the installer at local hardware outlets.

1-I

Rear

View

Pedestal

Screws

Install pedestal screws. Securely tighten lavatory anchor nuts or lag bolts.

Note: Space constraints may dictate method of fastening pedestal to floor.

1-E

ANCHOR SCREW INSTALLATION

 

 

Install lavatory anchor screws

 

leaving 1-7/8" threaded end

 

exposed as illustrated.

 

1-7/8"

 

Lavatory

 

Anchor

 

Screw

 

Nut

 

Washer

LAG BOLT INSTALLATION

Use lag bolts to secure lavatory as illustrated.

Lavatory

Steel

Hanger

Lag

Bolt

Washer

Lavatory

IMPORTANT: Final assembly of nut and washer or lag bolt method shown for reference only.

2

7301354-100 Rev. B

 

Image 2
Contents Pedestal WALL-HUNG on Furniture Above Counter Recommended Tools & MaterialsObserve Local Plumbing and Building Codes DROP-INLAG Bolt Installation Pedestal installationAnchor Screw Installation BTop of PedestalVanity Installation Wall-hung on furniture Mounting on FurnitureDescription Repair Parts ListAbove Counter or Drop-in 047523-0070A Wall mounting kit

403, 404, 641 specifications

American Standard is renowned for its high-quality plumbing fixtures and innovative technologies. Among their standout offerings are the models 403, 404, and 641, which exemplify superior design, efficiency, and performance.

The American Standard 403 is a toilet model that emphasizes efficiency and comfort. One of its main features is its WaterSense certification, which signifies it uses 20% less water than conventional toilets without sacrificing performance. This model includes a powerful flushing system designed to minimize clogs and enhance cleanliness, ensuring a dependable experience. The ergonomic height of the seat also caters to comfort, making it suitable for a wide range of users. Additionally, the 403 boasts a sleek, contemporary design that fits seamlessly into any bathroom décor.

The 404 model takes innovation a step further with its advanced flushing technology. It incorporates a dual-flush mechanism, allowing users to choose between a low-volume flush for liquid waste and a full-flush option for solids. This flexibility significantly promotes water conservation. The 404's elongated bowl provides extra comfort, and its stylish design complements any modern bathroom aesthetic. The toilet's easy-to-clean surface is another advantageous characteristic, as it resists stains and buildup, thus maintaining a fresh appearance with minimal maintenance.

Model 641 stands out with its integrated tank and bowl design, offering a compact and space-saving solution ideal for smaller bathrooms. Its unique shape not only saves space but also adds an aesthetic appeal to the fixture. The 641 is also designed with AquaForce technology, which maximizes flushing power while minimizing water usage. The toilet’s powerful flush ensures effective waste removal, making it a reliable choice for any household.

In summary, American Standard's models 403, 404, and 641 cater to diverse needs and preferences while embodying the brand’s commitment to quality and sustainability. With advanced flushing technologies, water-saving features, and stylish designs, these toilets provide functional solutions that elevate the bathroom experience. Homeowners looking for reliable performance, comfort, and efficiency will find these models to be excellent choices for modern living.