American Standard Bathroom Faucet manual Speed Connect Drain, Troubleshooting Guide

Page 1

Speed Connect™ Drain

Troubleshooting Guide

If sink does not hold water even though Stopper is in the “down” position:

• Follow CABLE ADJUSTMENT PROCEDURE.

If Stopper does not raise up fully or sink drains too slowly:

• Follow CABLE ADJUSTMENT PROCEDURE.

If you need to remove the Stopper:

• Follow STOPPER REMOVAL PROCEDURE.

If you would like the ability to remove your Stopper simply by lifting it out of the drain:

Follow STOPPER INSTALLATION PROCEDURE for “Unlocked” mode.

CABLE ADJUSTMENT PROCEDURE

Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A.

Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” in the illustration. Fig. B.

Use a small screwdriver to rotate the Cam in the clockwise direction as far as it will go. At this point the Stopper should be in the UP position. Fig. B, C.

Push DOWN on the Lift-Knob to make sure it is fully down. Fig. C.

Re-attach the Cable to the Drain Body Connection (2) by threading the Cable Connector (1) clockwise onto the Drain Body Connection (2) and hand-tighten. Fig. A.

Fig. A.

1

RE-ATTACH

DISCONNECT

2

 

Fig. B. Fig. C.

DOWN

CAM

 

 

 

 

1

CAM CAP

STOPPER

 

STOPPER REMOVAL PROCEDURE

Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A.

Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” and “Cam Cap” in the illustration. Fig. B.

Use fingers or small screwdriver under either side of the Cam Cap to pry it out from the Drain. Fig. D. Remove the Cam by pulling it straight out while wiggling gently to loosen the Rubber Seal. Fig. E.

The Stopper can now be removed by lifting it out of the Drain. Fig. F.

Fig. D.

Fig. E.

 

REMOVE

 

CAM CAP

REMOVE

CAM

Fig. F.

51314 Rev . 1 . 3

5

Image 1
Contents Speed Connect Drain Troubleshooting GuideLocked Mode Vandal Proof Unlocked ModeHOT Line for Help Cartridge Screws

Bathroom Faucet specifications

The American Standard Bathroom Faucet is a trusted fixture that combines functionality, style, and advanced technology to enhance any bathroom. Known for its robust build and aesthetic appeal, this faucet seamlessly blends into modern and traditional bathroom designs, making it a versatile choice for homeowners and remodelers alike.

One of the standout features of the American Standard Bathroom Faucet is its innovative flow control technology. Many models incorporate a unique ceramic disc valve, which ensures a drip-free performance. This advanced valve design provides a smooth operation, allowing users to easily adjust water temperature and flow without any hassle. The durability of the ceramic discs also means that they withstand wear and tear better than traditional rubber washers, leading to a longer lifespan and less frequent repairs.

Additionally, American Standard faucets are often equipped with the brand's exclusive Spot Resist finish, which helps to maintain their sleek appearance by resisting water spots, fingerprints, and smudges. This feature is particularly appreciated in high-use areas, as it requires minimal cleaning, allowing homeowners to spend more time enjoying their space rather than maintaining it.

The ergonomic design of the faucet handles allows for easy operation, even with wet hands. With options for single or double handle configurations, users can choose the setup that best suits their preferences and needs. Some models also feature a high-arc spout, which not only adds an elegant touch to the bathroom but also provides greater clearance for filling pots and washing hands.

For environmentally conscious consumers, many American Standard Bathroom Faucets come with WaterSense certification. This means they are designed to conserve water without sacrificing performance, using up to 30% less water than standard faucets. This eco-friendly approach helps homeowners save on water bills while reducing their environmental footprint.

In summary, the American Standard Bathroom Faucet provides a blend of classic and modern design elements with state-of-the-art technology. Its durable construction, user-friendly features, and eco-conscious design make it a fantastic addition to any bathroom, ensuring lasting satisfaction for years to come. Whether renovating or building a new space, investing in an American Standard faucet is an investment in quality craftsmanship and enduring style.