American Standard 2446 Troubleshooting Guide, United States, Col. Santa Clara

Page 5

 

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

CORRECTIVE ACTION

Does not flush

a. Water supply valve closed.

a. Open valve and allow water to fill tank.

 

b. Supply line blocked.

b. Shut off water supply, disconnect supply line, and inspect

 

 

all gaskets and washers. Reassemble. Also, see Fluidmaster

 

 

maintenance (see step 13).

 

c. Flush valve chain too loose or disconnected.

c. Readjust chain length as required.

 

d. Sand or debris lodged in water control.

d. Shut off water supply. Remove cap and clean per Step 13.

 

 

 

Poor or sluggish flush

a. Bowl water level too low.

a. Check that refill tube is connected to water control and

 

 

inserted into tank overflow without being kinked or damaged.

 

b. Supply valve partly closed.

b. Open supply valve fully. Be sure that proper supply tube size is used.

 

c. Partially clogged trapway and/or drain pipe and/or vent.

c. Remove obstruction. Consult a plumber if necessary.

 

d. Supply pressure too low.

d. Normal supply pressure must be at least 20 psi.

 

 

 

Toilet leaks

a. Poor supply line connection.

a. Review Step 9 of installation procedure.

 

b. Poor bowl to tank/floor connection.

b. Review Step 4 through 7 of installation procedure.

 

 

 

Toilet does not shut off

a. Flush valve chain too tight, holding flush valve open.

a. Readjust chain length as needed. Review step 10.

 

b. Flush valve seat and/or flapper worn or deformed.

b. Replace flapper/flush valve assembly, as needed.

 

c. Sand or debris lodged in water control.

c. Shut off water supply. Remove cap and clean per Step 13.

 

 

 

AS AMERICA, INC. (“AMERICAN STANDARD”) ONE-YEAR LIMITED WARRANTY

If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American-Standard will repair or, at its option, exchange the product for a similar model.

This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

In the United States:

American Standard Brands

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information

may also be obtained by calling the following toll free number: (800) 442-1902

www.americanstandard-us.com

 

In Canada:

 

In Mexico:

AS

Canada ULC

Customer Service Manager

2480 Stanfield Rd.

AS Maquila, S.A. de C.V.

Via Morelos #330

Mississauga, Ontario

Col. Santa Clara

Canada L4Y 1S2

Ecatepec 55540 Edo. Mexico

Toll Free: (800) 387-0369

www.americanstandard.com.mx

www.americanstandard.ca

 

- 5 -

7301186-100 Rev. C

Image 5
Contents V E F O R F U T U R E U S E Recommended Tools and MaterialsRemove OLD Toilet Install Toilet Install TankAdjustments Repair Parts ListTroubleshooting Instructions to Install Toilet SeatUnited States Troubleshooting GuideCol. Santa Clara Toll Free 800 7301186-100 Rev. C
Related manuals
Manual 5 pages 28.58 Kb

2446 specifications

The American Standard 2446 is a popular model in the realm of bathtubs, known for its exceptional combination of functionality, comfort, and design. This tub is particularly favored in contemporary bathrooms due to its sleek aesthetics and user-friendly features.

One of the primary characteristics of the American Standard 2446 is its spacious design, measuring 60 inches long, 30 inches wide, and 14 inches deep. This ample space allows for a comfortable bathing experience, making it a suitable choice for both relaxation and practicality. The tub’s smooth lines and modern silhouette contribute to a minimalist appearance, seamlessly fitting into various decor styles.

Constructed from high-quality acrylic, the American Standard 2446 is engineered for durability and lightweight convenience. Acrylic is known for its resistance to stains and impacts, ensuring that maintainability is simple and easy. Moreover, the surface is designed to retain heat longer than traditional materials, providing a warm and inviting bathing experience.

A standout feature of the American Standard 2446 is its slip-resistant bottom. This safety-focused design element enhances user confidence during entry and exit, making it a particularly wise choice for families and older adults. Additionally, the tub is designed with a built-in overflow that is both functional and aesthetically pleasing, allowing for a clean look while preventing water spillage.

Another important technology integrated into the American Standard 2446 is the easy-to-clean surface. The smooth acrylic finish allows for effortless maintenance, as it can be easily wiped down to remove soap scum and other residues. This feature is not only convenient but also promotes hygiene, ensuring that the bathtub remains fresh and inviting.

The American Standard 2446 also supports various installation options, including alcove and drop-in styles, increasing its versatility for different bathroom layouts. This adaptability ensures that it can be fitted into various spaces without compromising on aesthetics or functionality.

Overall, the American Standard 2446 combines comfort, safety, and design into one impressive bathing solution. With its high-quality materials, thoughtful features, and elegant design, it represents an excellent investment for any bathroom renovation or upgrade, catering to the needs of modern homeowners seeking both luxury and practicality.