Unpacking & Inventory

This Air Cleaner will require a minimal amount of assembly.

Remove all of the parts from the shipping box and lay them on a clean work surface. Compare the items to figure 1-2, verify that all items are accounted for before discarding the shipping box.

!WARNING

If any parts are missing, do not attempt to plug in the

power cord and turn “ON” the Air Cleaner. The Air Cleaner should only be turned “ON” after all the parts have been obtained and installed correctly. For missing parts, contact Steel City at 1-877-SC4-TOOL.

CAUTION: Make certain shipping blocks have been removed from between cabinet and blower assembly, before unit is turned on. You will have to remove the filters to access shipping blocks.

The following items are to be provided in the shipping box:

Fig. 1-1

A. Air Cleaner

Fig. 1-2

B.Eye-bolt 5/16-18 x 1-1/2” (4)

C.Flange nut 5/16-18 (4)

D.Rubber Pad (4)