Frigidaire FRA123KT1 Important Safety Instructions, Grounding type wall receptacle

Page 2

Important Safety Instructions

NOTE:

This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.

NOTE:

The power supply cord with

this air conditioner contains a current detection device designed to reduce the risk of fire.

Please refer to the section ‘Operation of Current Device’ for details.

In the event that the power supply cord is damaged, it cannot be repaired. It must be replaced with a cord from the product manufacturer.

WARNING

Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.

Grounding type wall receptacle

Do not, under any circumstances, cut, remove, or bypass the grounding prong.

Power supply cord with 3-prong grounding plug and current detection device

WARNING

For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.

WARNING

Prevent Accidents

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, including the following:

Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grille.

If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, remove the screen completely before installation.

Be sure the air conditioner has been securely and correctly installed according to the separate installation instructions provided with this manual. Save this manual and the installation instructions for possible future use in removing or reinstalling this unit.

When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.

WARNING

Electrical Information

The complete electrical rating of your new room air conditioner is stated on the serial plate. Refer to the rating when checking the electrical requirements.

Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.

Do not run air conditioner without outside protective cover in place. This could result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.

Unit must be upright for one hour prior to operating.

Plug in & press RESET

The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following:

Plug in the Air Conditioner.

The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out.

Press the RESET button. Again you will notice a click as the button engages.

The power supply cord is now supplying electricity to the unit. (On some products this is also indi- cated by a light on the plug head).

NOTE:

Do not use this device to turn the unit on or off.

Always make sure the RESET button is pushed in for correct operation.

The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.

If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from the product manufacturer.

2

2009 Electrolux Home Products, Inc.

All rights reserved.

 

 

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Use&Care Important Safety Instructions Grounding type wall receptacleProduct Registration & Normal Sounds Product Registration Record Your Model and Serial NumbersAir Conditioner Features & Operating Instructions To Turn Unit on YOU will seeOperating Instructions To Adjust FAN Speeds YOU will seeTo USE Auto FAN Feature YOU will see To Operate on FAN only To USE the Energy Saver FeatureSleep Feature YOU will see Fault Codes Timer Delay Stop / Start FeatureCheck Filter FEATURE, YOU will see Additional Things YOU should Know To Change Temperature DisplayTo Turn Unit OFF YOU will see Exhaust ControlCare and Cleaning Energy Saving Ideas Occurrence Solution Before You CallMajor Appliance Warranty Exclusions This warranty does not cover the following

FRA123KT1 specifications

The Frigidaire FRA123KT1 is a high-performance window-mounted air conditioning unit designed to offer efficient cooling for medium-sized rooms. With a cooling capacity of 12,000 BTU, it is suitable for spaces up to 550 square feet, making it an ideal option for bedrooms, living rooms, and offices. Featuring a sleek and modern design, the FRA123KT1 seamlessly blends into various interiors while providing a powerful cooling solution.

One of the standout features of the FRA123KT1 is its Energy Efficiency Ratio (EER), which allows for optimal cooling while keeping energy consumption low. This unit is designed with an energy saver mode that helps maintain comfortable temperatures without excessive power usage, contributing to reduced electricity bills. Additionally, it is equipped with an ENERGY STAR certification, indicating that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency.

The FRA123KT1 boasts multiple cooling speeds and a user-friendly electronic control panel. Homeowners can easily customize their comfort with three fan speeds and a programmable thermostat. This flexibility ensures that users can adjust the airflow and temperature to meet their personal preferences. The remote control feature adds convenience, allowing adjustments from across the room without the need to get up.

Another noteworthy characteristic is its built-in dehumidifier, which helps to alleviate excess moisture in the air, creating a more comfortable indoor environment. With a dehumidification capacity of up to 3.4 pints per hour, the FRA123KT1 is effective at combating sticky and humid conditions, especially during the warmer months.

Furthermore, the unit features a washable filter that captures dust, pollen, and other allergens, promoting cleaner air quality. The filter is easy to access and clean, ensuring that maintenance is straightforward and hassle-free. This unit also offers a quiet operation mode, allowing for a peaceful atmosphere in the home or workplace, particularly during nighttime hours.

Overall, the Frigidaire FRA123KT1 stands out for its combination of efficiency, versatility, and user-friendly features. With its comprehensive cooling capabilities, energy-saving technologies, and convenient operation, this air conditioner is an excellent choice for anyone seeking reliable and effective climate control in their living spaces.
Top Page Image Contents