Frigidaire 220202D019 manual Air Conditioner Features

Air Conditioner Features

(continued)

TO TURN UNIT ON:

NOTE: The following instructions represent the Unit Controls, the same instructions can be used for the Remote Control.

YOU WILL SEE:

DO THIS:

PRESS ON/

OFF

BUTTON

TO CHANGE TEMPERATURE SETTING:

DO THIS:

PRESS TO

RAISE

PRESS TO

LOWER

TO ADJUST FAN SPEEDS:

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

YOU WILL SEE:

Note: Tap or hold either up( ) or down( ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60˚F (16˚C) and 90˚F (32˚C). If you want the display to read the actual room temperature. See “To Operate on Fan Only” section on Page 7.

YOU WILL SEE:

A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the “SLOWER” button is pressed the motor speed will slow down at multiple intervals (90 distinct settings), to a minimum setting of 10. To speed the motor up, press the “FASTER” button. The speed will increase at multiple intervals to a maximum setting of 99. After 5 seconds the control will automatically change back to displaying the set temperature.

6

SZ000400(En)-Yaokong 6 12/10/2004, 5:36 PM