Mitsubishi Electronics SLZ-A09, A12 Operation, Description of Auto Restart Function, Mode select

Page 3

2. Operation

1

2

HEAT

AUTO

 

 

COOL

 

 

 

 

 

 

DRY

FAN

 

 

VANE

 

 

 

SELECT

 

 

TIME

 

 

 

A

h

ON/OFF TOO TOO

WARM COOL

1

FAN SELECT

AUTO COOL

HEAT DRY VANE TIME

MODE

RESET

For SLZ-A09/A12/A18AR

A

ON/OFF TOO TOO

WARM COOL

1

FAN SELECT

AUTO COOL

HEAT DRY VANE TIME

MODE

2

RESET

For SLZ-A09/A12/A18AR

2.1. Description of “AUTO RESTART FUNCTION”

•This unit is equipped with the auto restart function.When the main power is turned on, the air conditioner will start operation automatically in the same mode as set with the remote controller before the shutoff of main power.

•If the unit was set to off with the remote controller before the shutoff of main power, it will remain stopped even after the main power is turned on.

•If the unit was in the TEST RUN before the shutoff of main power, it will start operation, at main power on, in the same mode as set with the remote controller before the TEST RUN.

2.2. Remote controller (How to set the batteries)

1Remove the back lid and insert batteries. Then reattach the back lid.

• Insert the minus pole of the batteries first.

• Check if the polarity of the batteries is correct.

2Press the RESET button.

• If the RESET button is not pressed, the remote controller may not oper- ate correctly.

• Press using a thin stick.

2.3. Switching the unit on/off

•The power supply should not be turned off while the air conditioner is in use. This can cause the unit to break down.

1 Press the ON/OFF button.

•Even if you press the ON/OFF button immediately after shutting down the operation in progress, the air conditioner will not start for about three minutes. This is to prevent the internal components from being damaged.

A For the after-mentioned operating functions of the remote controller, all items are indicated in this illustration.

Note:

The signal can travel up to approximately 7meters (in a straight line) within 45 degrees to both right and left of the center line of the receiver.

In addition, the signal may not be received if there is interference of light of fluorescent lights or strong sunlight.

2.4. Mode select

1If the unit is off, press the ON/OFF button to turn it on.

2Press the operation mode MODE button and select the operation mode.

Each time the operation mode MODE button is pressed the moves. (A)

SLZ-A09/A12/A18AR

s

Automatic (cooling/heating) mode

 

Cooling mode

 

Drying mode

 

Heating mode

Information for multi system air conditioner (Outdoor unit: MXZ series)

sMulti system air conditioner (Outdoor unit: MXZ series) can con- nect two or more indoor units with one outdoor unit. According to

the capacity, two or more units can operate simultaneously.

•When you try to operate two or more indoor units with one outdoor unit simultaneously, one for the cooling and the other for heating, the opera- tion mode of the indoor unit that operates earlier is selected. The other indoor units that will start the operation later cannot operate, indicating an operation state.

In this case, please set all the indoor units to the same operation mode.

•There might be a case that the indoor unit, which is operating in (AUTO) mode. Cannot change over to the operating mode (COOL ↔ HEAT) and becomes a state of standby.

•When indoor unit starts the operation while the defrosting of outdoor unit is being done, it takes a few minutes (max. about 15 minutes) to blow out the warm air.

•In the heating operation, though indoor unit that does not operate may get warm or the sound of refrigerant flowing may be heard, they are not malfunction. The reason is that the refrigerant continuously flows into it.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Air-Conditioners Safety Precautions ContentsOperation Remote controller How to set the batteriesSwitching the unit on/off Mode selectSelecting a fan speed Selecting a temperatureAdjusting vertical airflow direction Using the timerEmergency operation Care and cleaningWhen the remote controller cannot be used Main switch, before cleaning or servicing the unitFollowing do not indicate any malfunction TroubleshootingInstallation, relocation and inspection Installation placeRelocation SpecificationsElectrical work Also consider operation soundBG79U162H01

SLZ-A09, A12, A18AR specifications

Mitsubishi Electronics has long been a leader in the field of air conditioning systems, and its A18AR, SLZ-A09, and A12 models are prime examples of the innovative technology and efficiency that define the brand. Each model is designed to meet varied environmental needs while ensuring user comfort and energy efficiency.

The Mitsubishi A18AR is a robust unit that excels in versatility. This air conditioning model is ideal for both residential and commercial applications. It features advanced inverter technology, allowing for precise temperature control and significant energy savings. The A18AR is equipped with a high-efficiency compressor, ensuring optimal performance even in extreme weather conditions. Notably, its eco-friendly refrigerant contributes to reduced environmental impact. Users will appreciate the quiet operation of this unit, designed to maintain a comfortable atmosphere without disruptive noise.

The SLZ-A09 is a unique combination of style and functionality. This ceiling-mounted unit is perfect for spaces with limited wall space. It integrates seamlessly into the ceiling, making it an unobtrusive solution for any room. The SLZ-A09 includes advanced features such as a multi-directional air flow system that allows for better temperature distribution. The remote control with a programmable timer adds to the convenience, enabling users to customize their cooling experience according to their schedules. This model also utilizes R32 refrigerant, which offers better efficiency and contributes to lower greenhouse gas emissions.

The A12 model stands out for its energy efficiency and compact design. This model is designed for spaces that require a reliable cooling solution without excessive bulk. The A12 incorporates smart technology, allowing users to connect it to a home automation system. This connectivity facilitates remote operation and energy monitoring, enabling homeowners to better manage electricity consumption. Furthermore, the A12 features a sleek, modern design that enhances the aesthetics of any room.

In summary, Mitsubishi Electronics' A18AR, SLZ-A09, and A12 air conditioning models exemplify the company's commitment to quality and innovation. Their advanced features, energy-efficient technologies, and user-friendly designs make them suitable for a wide range of applications, providing comfort without compromising on environmental responsibility. Each model caters to specific needs, ensuring that customers find the perfect fit for their cooling requirements. With Mitsubishi's reputation for reliability and performance, these air conditioning units are an excellent investment for any property.
Top Page Image Contents