Mitsubishi Electronics 2.5KKC During operation, Power line, fuse or circuit breaker, Grounding

Page 4

MITSUBISHI CENTRALLY CONTROLLED

˚C

ON/OFF –

E1. Safety Precautions

1.1. Installation

5) Power line, fuse or circuit breaker

Warning:

Make sure that the unit is powered by a dedicated line. Other ap- pliances connected to the same line could cause an overload.

Make sure that there is a main power switch.

Be sure to adhere to the unit’s voltage and fuse or circuit breaker

A

ratings. Never use a piece of wire or a fuse with a higher rating

than the one specified.

 

 

A Fuse or circuit breaker

B

B Main power switch

 

 

 

6) Grounding

 

 

 

Caution:

 

 

 

• The unit must be properly grounded. Never connect the ground-

 

 

 

ing wire to a gas pipe, water pipe, lightning conductor or telephone

 

 

 

 

 

 

grounding wire. If the unit is not grounded properly, electric shock

 

 

 

may result.

 

 

 

• Check frequently that the ground wire from the outdoor unit is

 

 

 

 

 

C

properly connected to both the unit’s ground terminal and the

 

 

grounding electrode.

 

 

 

 

 

 

C Grounding electrode

1.2. During operation

Caution:

Do not use any sharp object to push the buttons, as this may damage the remote controller.

Do not twist or tug on the remote controller cord as this may dam-

age the remote controller and cause malfunction.

• Never block or cover the indoor or outdoor unit’s intakes or out- lets. Tall items of furniture underneath the indoor unit, or bulky items such as large boxes placed close to the outdoor unit will reduce the unit’s efficiency.

Warning:

Do not splash water over the unit and do not touch the unit with wet hands. An electric shock may result.

Do not spray combustible gas close to the unit. Fire may result.

Do not place a gas heater or any other open-flame appliance where it will be exposed to the air discharged from the unit. Incomplete

combustion may result.

4

Image 4 Contents
PLH-2, 2.5KKC Contents Safety Precautions Remote controllerOutdoor unit Indoor unitDuring operation Power line, fuse or circuit breakerGrounding Disposing of the unit Indoor unit and remote controller Introduction ComponentsOutdoor unit Components OperationOperation modes Switching the unit on/off CoolingDrying dehumidifying HeatingSelecting a temperature Automatic cooling / heatingUsing the timer Set the current timeUsing the timer Clock on OFF Set the time to start the unit as followsSet the time to stop the unit as follows Changing the set timesAuto Start Operation Selecting a fan speedAuto Stop Operation Vertical airflow adjustment Adjusting vertical airflow directionPress button to select the vertical airflow direction Cleaning the filters and the indoor unit Tips for best results CareCare and cleaning Care and cleaningEnd-of-season Pre-season checksTroubleshooting Following do not indicate any malfunctionSpecifications Operating rangeBG79S987H02