Sharp R-756 Before Operation, Setting the Clock, Plug in the oven, Timer/Clock Set

BEFORE OPERATION

Plug in the oven. 1.

1.The oven display will flash:

2.	Press the STOP/CLEAR key.	2.
3.	The display will show:
To set the clock, see below.		3.

x1

SETTING THE CLOCK

Your oven has a 12 hour and a 24 hour clock.

•To select the 12 hour clock, press the KITCHENTIMER/CLOCK SET

key once for 3 seconds. will appear on the display.

•To select the 24 hour clock, press the KITCHENTIMER/CLOCK SET

key twice. will appear on the display.

To set the time of day follow the instructions below:

x1

x2

1. Press the KITCHEN	2. Enter the time by	3. Press the KITCHEN
TIMER/CLOCK SET	pressing the TIME	TIMER/CLOCK SET
for 3s until “12H”	keys.	key once to start the clock.
displays.
			x1

NOTES:

•Press the STOP/CLEAR key if you make a mistake during programming.

•If you press any of the TIME keys too many times, continue to press the key until the desired time re-appears.

•To check the time of day during a cooking process, press the KITCHENTIMER/CLOCK SET key and the time of day will remain on the display as long as you keep your finger on the key.This does not affect the cooking process.

•If the clock is set, when cooking is complete, the display will show the correct time of day.

If the clock has not been set, the display will only show when cooking is complete.

•If the electrical power supply to your microwave oven is interrupted, the display will intermittently

show after the power is reinstated. If this occurs during cooking, the programme will be erased.The time of day will also be erased.

•When you want to reset the time of day, follow the above example again.

8

R-756

10/23/201011:02:57