Changing your compactor3 color

Behind the color panel on the front of your compactor’s drawer is another color. There may also be one or two extra panels, depending on the model you have. The panels have a different color on each side, so you can have a choice of two to six colors for the front. The Consumer Buy Guide label lists the color choices.

To change the color of your compactor’s front panel, follow the directions below. All you need is a medium-srzed screwdriver

Slide out drawer until it stops.

Lift front to clear stops. Pull straight out.

Remove two screws shown.

Remove handle.

Remove the color panel you want.

Be careful -edges may be sharp.

Install desired color panel in front, behind drawer trim. Reinstall the remaining color panels between cardboard spacers.

Make sure panels are all the way down.

Replace handle and screws.

Option: Match your kitchen’s color scheme by replacing color panels with your own creation (wall- paper, panelling). See “ln- stallation Instructions:’

l WARNING: REPLACE HANDLE BEFORE

OPERATING COMPACTOR TO AVOID INJURY FROM MOVING PARTS.

l Replace	the	drawer:
-Put	drawer		rollers	over		stops in the drawer
gurdes.
-Slide	drawer		back	to	stops.
-Lift	front	of	drawer	to	clear	stops
-Slide	It all	the way		in