OPERATION
4
Control panel
1.Display for temperature setting
The preset temperature of compartment selected is displayed. It is not the actual temperature in the compartment.
2.Display for compartment selected
3.Select button
The compartment selected can be changed by pressing the select button.
Press the select button
Initial display for | Initial display for |
refrigerator compartment | freezer compartment |
4.
/
button
Use to select temperature.
5.
button
Finalises the temperature setting.
6.Plasmacluster button and display
Press to start / cancel the plasmacluster operation.
NOTE
•The display for temperature setting and selected compartment will turn off when there is no operation for
1 minute. (When either button is pressed, it lights again.)
•The plasmacluster display stays alight while ever the operation is selected.
Plasmacluster
The plasmacluster automatically starts operating when the refrigerator is powered on.
To cancel operation
Press the "
" button (The light turns off).
To start operation
Press the "
" button again.
Notes about PLASMACLUSTER operation
The ioniser inside your refrigerator releases clusters of ions, which are collective masses of positive and negative ions, into the freezer and refrigerator compartments. These ion clusters help to inactivate airborne mold fungus.
mold
fungus
•There may be a slight odors in the refrigerator. This is the smell of ozone generated by the ionizer. The amount of ozone is minimal, and quickly decomposes in the refrigerator.
Controlling temperature
The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows.
Refrigerator compartment
Adjustable between 0°C and 6°C in steps of 1°C.
1 Press the select button.
lighting
2 Press the 
/
button and set the temperature. [ 
: increase, 
: decrease ]
3 Press the "
" button to finalise the setting.
Freezer compartment
Adjustable between
1 Press the select button.
lighting
2 Press the 
/
button and set the temperature. [ 
: increase, 
: decrease ]
3 Press the "
" button to finalise the setting.
Door Alarm
When the refrigerator or freezer door is left open, the door alarm will sound.
•The door alarm will sound 1 minute after opening the door and again after 1 minute (once in each case).
•If the door is left open for approx. 3 minutes, the alarm will sound continuously.
To cancel alarm signal
Press the select button continuously for 3 seconds or more while holding down the "
" button.
It shows the door alarm stop.
Use the same method to restart the alarm signal function.