Installation, Before using your refrigerator

INSTALLATION

WARNING

■Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation and a leakage. Condensation may also build on the outer cabinet and cause rust.

■In order to prevent possible electric shock, connect the receptacle of earth to the earth terminal properly.

Keep adequate ventilation space around the refrigerator.

•

The figure shows the minimum space required for

installing the refrigerator. (Please note that power

consumption is measured in a different environment)

•

By keeping greater space, the refrigerator may be

operated under a less amount of power consumption.

•

If using the refrigerator in the smaller space dimension

than the below figure, it may cause the temperature

rise in the unit, loud noise and failure.

90mm or more

1300mm

60mm or more

60mm	60mm
or more	or more	1040mm	1350mm
		SJ-RM323T SJ-WS363T
			SJ-WP363T

Free standing type

2 Use the two front adjustable feet, to ensure that the refrigerator is positioned firmly and flat on the floor.

Adjustable foot

3 Clip the foot cover (supplied inside the refrigerator compartment) in position in front of the two adjustable feet.

Foot cover

NOTE

•Position your refrigerator so that the plug is accessible.

•Keep your refrigerator out of direct sunlight.

•Do not place next to heat generating appliance.

•Do not place directly on the ground. Provide suitable stand.

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water.

Before transporting

•Wipe up water in the evaporating pan. Before wiping up the water, wait more than 1 hour after pulling out the plug because refrigeration cycle equipment is extremely hot. (The evaporating pan is located on the rear of the product.)

Evaporating

Pan

NOTE

•Do not bend or damage the ductwork located on the inside of the evaporating pan. It may cause failure.

When transporting

•The casters allow the refrigerator to move back and forth.

•Carry the refrigerator by holding the handles located on the rear and the bottom.

Casters (4pcs.)

When the door is heavy to open

(Only for SJ-WS363T, SJ-WP363T)

When one side door is heavy

•When the left side is heavy, lower the right side adjustable foot.

(Until the opposite side adjustable foot is slightly off-ground.)

Heavy

Adjustable foot

•When the right side is heavy, lower the left side adjustable foot.

When both sides are heavy

•When the refrigerator is tilted backwards insert a wooden board (with relatively large width), etc. between the rear of the refrigerator and the floor to adjust the tilting.

Front	Back
	A wooden board
	(with relatively
	large width)

Reversible door (Only for SJ-RM323T)

It is possible to change the door to left side opening. To modify the door a REFRIGERATOR HINGE KIT (for left side opening) will be required, SJ-LR320TD. For details of the kit and the modification work, please contact the service agent approved by SHARP.

CAUTION SHARP recommends that all modification work will be carried out by the approved service agent.

SJ-WS363T specifications

The Sharp SJ-WS363T is a modern refrigerator designed to meet the needs of families and individuals who seek both efficiency and style in their kitchen appliances. Standing out with its sleek stainless steel finish, this refrigerator is not only aesthetically pleasing but also packed with advanced features and technologies that enhance its functionality.

One of the main highlights of the SJ-WS363T is its spacious design, which includes a generous storage capacity that can easily accommodate the groceries and perishables of larger households. The refrigerator features adjustable shelves and compartments that allow users to customize the layout according to their needs, making it easier to store items of various sizes. Additionally, the deep door shelves provide extra storage for beverages and condiments, maximizing space efficiency.

The SJ-WS363T is equipped with Sharp’s exclusive Plasmacluster Ion Technology, which is designed to improve the freshness of food while minimizing odors. This technology releases positive and negative ions into the refrigerator, effectively reducing harmful bacteria and mold, ensuring that your food stays fresher for a longer period. This is particularly beneficial for those who prioritize food safety and quality.

In terms of temperature control, the Sharp refrigerator boasts a multi-airflow system that ensures even cooling throughout the unit. By maintaining consistent temperatures in both the refrigerator and freezer compartments, users can rest assured that their food will be preserved optimally. The temperature can be easily adjusted using an intuitive digital control panel located on the outside, allowing for quick changes without the need to open the door.

Energy efficiency is another key feature of the SJ-WS363T. It is designed with an energy-saving mode that not only reduces electricity consumption but also contributes to lower utility bills. This eco-friendly characteristic is particularly appealing to environmentally conscious consumers.

Furthermore, the unit incorporates a non-frost feature in the freezer compartment, eliminating the need for manual defrosting. This innovation saves time and ensures that users can enjoy hassle-free maintenance of their appliance.

In summary, the Sharp SJ-WS363T is a versatile and efficient refrigerator that combines advanced technology with contemporary design. Its spacious interior, innovative freshness-preserving features, user-friendly controls, energy efficiency, and low maintenance needs make it an excellent choice for anyone in the market for a modern refrigerator that meets everyday needs while enhancing the kitchen's overall look.