Maytag UXT5230AY, UXT5236AY Installation Instructions, Prepare Location, To wire through top

Page 7

INSTALLATION INSTRUCTIONS

Prepare Location

NOTE: It is recommended that the vent system be installed before hood is installed.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

1.Disconnect power.

2.Depending on your model, determine which venting method to use: roof, wall or non-vented (recirculating).

3.Select a flat surface for assembling the range hood. Place covering over that surface.

4.Lift the range hood and set it upside down onto covered surface.

5.If cabinet has recessed bottom, add wood filler strips on each side. Install screws to attach filler strips in locations shown.

Wood filler strips (recessed cabinet bottoms only)

3" (7.6 cm)

Cabinet

bottom

3" (7.6 cm)

Wall

To wire through top:

1.Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark the point on this line that is ⁷⁄₈" (2.2 cm) from back wall. Drill a 1¼" (3.2 cm) diameter hole through the cabinet at this point.

A

⁷⁄₈" (2.2 cm)

 

from wall,

 

not cabinet

 

frame

Centerline

A. 8³⁄₈" (21.3 cm) for 30" (76.2 cm) models 11³⁄₈" (28.9 cm) for 36" (91.4 cm) models

To wire through wall:

1.Mark a line distance “A” from the right of the centerline on the underside of the wall. Mark the point on this line that

is ⁷⁄₈" (2.2 cm) from the underside of the cabinet. Drill a

1¹⁄₄" (3.2 cm) diameter hole through the rear wall at this point.

Determine Wiring Hole Location

Cut only one 1¹⁄₄" (3.2 cm) diameter wiring access hole.

1.Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made.

A

A. Centerline

⁷⁄₈" (2.2 cm)

A

Centerline

A. 8³⁄₈" (21.3 cm) for 30" (76.2 cm) models 11³⁄₈" (28.9 cm) for 36" (91.4 cm) models

Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System

Roof Venting

To make a 4¹⁄₄" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet top and bottom:

1.Mark lines ¹⁄₂" (1.3 cm) and 4³⁄₄" (12.1 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hotte D’ASPIRATION DE Table of Contents Range Hood SafetyImportant Safety Instructions Tools and Parts Installation RequirementsLocation Requirements Venting Methods Installation Clearances Cold Weather InstallationsVenting Requirements Makeup AirExample vent system Electrical RequirementsCalculating Vent System Length Cm Round Vent SystemDetermine Wiring Hole Location Installation InstructionsTo wire through top To wire through wallTo make a 3½ x 10½ 8.9 cm x 26.7 cm rectangle in the wall Install Vent SystemWall Venting Style 3 Cut Openings for 7 17.8 cm Round VentInstall Range Hood Power Supply Cable Installation Make Electrical Connection Complete InstallationRange Hood Controls CleaningRange Hood USE Range Hood CareReplacing a Halogen Lamp To Replace the FilterSE119A Wiring DiagramCanada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Exigences demplacement Exigences DinstallationOutils et pièces Air d’appoint Installations dans les régions au climat froidExigences concernant l’évacuation Distances de dégagement à respecterSystème dévacuation avec conduits ronds de 7 17,8 cm Exemple de circuit d’évacuationSystème de décharge de 3¹⁄₄ x 10 8,3 cm x 25,4 cm Calcul de la longueur du circuit d’évacuationSpécifications électriques Instructions D’INSTALLATIONPréparation de lemplacement Déterminer l’emplacement du trou de passage du câblePassage du câble à travers le mur Câblage à travers le sommet du placardÉvacuation par le mur Installation du conduit d’évacuation Installation de la hotteDécoupe en trou de serrure Installation sans décharge à l’extérieur recyclage Installation du cordon dalimentationRaccordement électrique Achever l’installationEntretien DE LA Hotte Commandes de la hotte de cuisinièreNettoyage Remplacement d’une lampe à halogène Remplacement du filtreSchéma DE Câblage SE119AAu Canada Assistance OU ServiceAccessoires Garantie DES Gros Appareils Ménagers Whirlpool CorporationW10400323E

UXT5236AY, UXT5230AY specifications

The Maytag UXT5236AY and UXT5230AY are two impressive under-cabinet range hoods designed to enhance kitchen ventilation while providing a sleek and modern appearance. Built with efficiency and ease of use in mind, these range hoods showcase Maytag's commitment to quality and performance.

One of the standout features of both models is their powerful ventilation system. Equipped with a robust motor, the UXT5236AY and UXT5230AY provide adjustable fan speeds, allowing users to customize airflow based on cooking needs. Whether frying, boiling, or baking, these hoods efficiently eliminate smoke, odors, and steam, ensuring a cleaner and more comfortable cooking environment.

Another key characteristic is their stainless steel construction. This material not only ensures durability but also adds a sophisticated touch to any kitchen decor. The brushed finish resists fingerprints and smudges, making maintenance a breeze. With easy-to-clean surfaces, homeowners can keep their kitchens looking pristine without excessive effort.

Both models incorporate bright, energy-efficient LED lighting. This feature illuminates the cooking surface below, enhancing visibility and ensuring every meal can be prepared with precision. The lights also consume less energy compared to traditional bulbs, promoting sustainability and cost efficiency.

The design of the UXT5236AY and UXT5230AY also reflects user-friendly innovation. They come with a dishwasher-safe aluminum grease filter that effectively captures grease and particles, preventing buildup in the hood. The filter is easily removable and can be cleaned in the dishwasher, making upkeep simple for busy homeowners.

In terms of installation, both models are designed to fit seamlessly into standard kitchen cabinetry. They come with detailed installation instructions and mounting hardware, allowing for a straightforward setup process. Their compact size ensures that they can fit in various kitchen layouts, providing flexibility for remodels or upgrades.

Noise levels are another important consideration, and both the UXT5236AY and UXT5230AY operate with quiet efficiency. The range hoods are engineered to minimize sound, allowing for a more enjoyable cooking experience. This is particularly beneficial when hosting guests or preparing meals for the family.

In summary, the Maytag UXT5236AY and UXT5230AY range hoods provide powerful ventilation, modern styling, and convenient features that make them an excellent choice for any kitchen. With their durable construction, energy-efficient lighting, and easy maintenance, these range hoods exemplify the blend of form and function that Maytag is known for.
Top Page Image Contents