Installation, Electrical connection | Hotpoint HTS93G specification

Installation

!It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product.

!Read the instructions carefully: there is important information about installation, use and safety.

!Do not carry out electrical or mechanical variations on the product or on the discharge conduits.

!Your hood is ready to be used in the suction version. To use the filtering version, you must order the suitable kit where you will find all the necessary details.

The information for transforming the hood from the suction version to the filtering version is already contained in the manual supplied with the product.

Installation

Electrical connection

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area apply a bi-polar switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.

Warning! Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

Connection to a discharge tube

Connect the hood and discharge holes on the walls with a diameter equivalent to the air outlet (connection flange).

Using the tubes and discharge holes on walls with smaller dimensions will cause a diminution of the suction performance and a drastic increase in noise.

Any responsibility in the matter is therefore declined.

!The company declines any responsibility whenever these regulations are not respected.

The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the range hood must be not less than 50cm from electric cookers and 65cm from gas or mixed cookers. If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

Expansion wall plugs are provided to secure the hood to most types of walls/ceilings. However, a qualified technician must verify suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling must be strong enough to take the weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.

HTS93G specifications

The Hotpoint HTS93G is an advanced freestanding refrigerator that combines practicality with modern design, making it a valuable addition to any kitchen. With a sleek exterior and a range of impressive features, this appliance is designed to meet the needs of contemporary households.

One of the standout characteristics of the HTS93G is its spacious interior. With a generous total capacity, this refrigerator provides ample room for groceries, allowing users to store large quantities of food without compromising on organization. The adjustable shelves and storage bins maximize flexibility, ensuring that items of various sizes can be accommodated with ease.

The HTS93G is equipped with advanced cooling technologies that ensure optimal food preservation. Its No Frost technology prevents the buildup of ice, eliminating the need for manual defrosting while also maintaining consistent temperatures throughout the fridge. This feature not only helps preserve food quality but also enhances energy efficiency by reducing appliance workload.

In addition to its cooling capabilities, the HTS93G boasts an innovative Air Flow system that promotes even air circulation within the refrigerator compartment. This technology helps keep products at consistent temperatures, ensuring that fruits, vegetables, and dairy items remain fresh for longer periods.

The Hotpoint HTS93G also prioritizes user convenience with its integrated LED lighting, which provides bright and energy-efficient illumination throughout the fridge. This feature makes it easy to locate items, even in the farthest corners. Furthermore, the door storage compartments are designed for easy access to frequently used items, making daily meal preparation hassle-free.

Energy efficiency is another key aspect of the HTS93G, as it is designed to operate with minimal energy consumption. Its commitment to sustainability is reflected in its energy rating, ensuring that it not only conserves energy but also helps reduce utility bills.

In terms of design, the HTS93G features a modern aesthetic that seamlessly complements any kitchen décor. Its sleek lines and polished finish add a touch of sophistication, while the ergonomic handles ensure easy opening and closing.

In summary, the Hotpoint HTS93G is a versatile and efficient refrigerator that combines modern technology with user-friendly features. Its roomy interior, innovative cooling systems, energy efficiency, and stylish design make it an excellent choice for individuals and families looking to enhance their kitchen experience.