| c) | Fixing the kubbe attachment | ||
| Once the meat grinder has been | |||
|
| assembled as described under a): | ||
| • | Turn open the ring clamp | and ... | |
GB | ||||
|
|
| ||
| • | Replace the cutting disc | with the | |
| ||||
|
| two plastic parts of the kubbe |
attachment . Fix these as described in a).
•When everything has been attached correctly, screw on the
ring clamp tightly.
d)Fixing the grater and cutter attachments
When the meat grinder has been removed from the motor block:
•First select the appropriate attach- ment. You can choose from...
- a coarse grater , - a fine grater ,
- a cutter attachment .
•Fix the grater or cutter attachment in the provided round recesses in the grater funnel. .
•Place the grater funnel in the motor block in such a way that the arrow of the grater funnel points to the symbol ”open“.
Press in the grater funnel lightly and turn it upwards till it is in a ver- tical position.
•To remove once again press in the grater funnel lightly and turn it in the direction of the symbol "open“ (Fig. A). Now you can take out the grater funnel.
e)Fixing the shortbread cookie attachments
Once the meat grinder has been assembled as described under a):
• | Turn open the ring clamp | and ... |
• | take out the cutting disc | and the |
| cross blade . |
|
•Remove the pattern strips from the shortbread cookie attachment and ...
•place the shortbread cookie attachment in the mincer casing
.
Insert both the edges of the short- bread cookie attachment into the slots in the mincer casing .
•When everything has been attached correctly, screw on the
ring clamp tightly and ...
•once again attach the pattern strips to the front part of the short- bread cookie attachment.
•To remove you must again remove the pattern strip first, before turn-
ing open the ring clamp and taking out the shortbread cookie attachment .
6