Shure SCM810AZ manual Installation and System Setup, Rack Mounting the Mixer, SCM810/E Connections

Page 6

INSTALLATION AND SYSTEM SETUP

RACK MOUNTING THE MIXER

To mount the SCM810 in a standard 483 mm (19-inch) audio equipment rack, slide the mixer into the rack and secure it with the supplied Phillips head screws, as shown in Figure 4. Use all four screws.

RACK MOUNTING THE SCM810/E

FIGURE 4

SCM810/E CONNECTIONS

Make audio connections as follows (see Figure 5).

1.Connect microphone- or line-level signal sources to the Channel Input connectors (use conventional 2-conductor shielded cables).

2.Insert a screwdriver or other tool in the slot above each block connec- tor and adjust the input slide switch as required: microphone (left posi- tion), microphone with 48 V phantom power (center position), or line level (right switch position).

3.Connect the SCM810 Line Level Output to the input of mixers, EQs, amplifiers or recorders.

4.For headphones monitoring, connect headphones to the front-panel 1/4-inch PHONES jack.

5.Connect the power cord to 120 Vac (SCM810) or 230 Vac (SCM810E). If the operating voltage is to be changed, refer to the Internal Modifications section.

TO STEREO OR MONO HEADPHONES

FROM AUX– OR LINE–LEVEL SOURCE

TO AMP/REC/MIXER INPUT (CH. 1–7)

FROM MIC/LINE SOURCE (CH. 1–8)

TO AMP/RECORD/MIXER INPUT

OR FROM AUX SOURCE (CH. 8)

MIXER OUTPUT TO AMP/REC/MIXER INPUT

TO LINKED SCM810 MIXERS

TO ADVANCED FUNCTION WIRING

TO 120 VAC POWER SOURCE

AUDIO CONNECTIONS

FIGURE 5

OUTPUT LIMITER SETTINGS

The output limiter prevents distortion during loud program peaks without af- fecting normal program levels. This prevents overloading of the devices connected to the SCM810/E output.

Increasing the individual channel or Master Gain controls will increase the average output and, in turn, the amount of limiting. As supplied, the out- put limiter is defeated. However, you can change the limiter threshold so that the peak output level is +4, +8, or +16 dBm. Refer to the Internal Mod- ifications section.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SCM810/SCM810C SCM810/SCM810J Table of Contents System Features DescriptionOperating Principles Front Panel Features Rear Panel FeaturesAC Power Connector and Rocker Switch Connector supplies AC = Limiter off DIP SwitchesSW702 15 dBRack Mounting the Mixer Installation and System SetupOutput Limiter Settings SCM810/E ConnectionsLow Cut Filter High-Pass Equalizer FunctionsBasic Mixer Operation High-Frequency ShelvingNetworking Multiple Mixers GLOBAL/LOCAL FunctionsLink Cables Specifications Replacement PartsLogic Connection Specifications Logic Function Input Connector Pin NoAdvanced Functions Cough Button Remote Channel-On IndicatorsSuggested Logic Applications Chairperson-Controlled MutingLoudspeaker Muting Filibuster ModeInhibiting Gating for Unwanted Sounds Inhibit FunctionExternal Logic Devices Voltage SelectionDiode Isolation of Logic Controls Digital Controls or MicrocomputersDisable Master Level Control Internal ModificationsSCM810 Speech Gate for Mixing Console Off-Attenuation Level Resistor ValueIncrease Hold Time 米国、 カナダ、 中南米、 カ リ ブ海諸国 ：

SCM810AZ specifications

The Shure SCM810AZ is a highly regarded automatic mixer designed specifically for professional audio applications. It is an essential tool for sound reinforcement in situations where multiple audio sources need to be managed efficiently, such as in conference rooms, broadcast environments, and live events.

One of the standout features of the SCM810AZ is its advanced Automatic Mixing technology. This allows the unit to intelligently mix multiple microphones by reducing comb filtering and minimizing background noise. It utilizes an algorithm that automatically detects the level of each input and gradually adjusts its gain to create a balanced output. This results in a cleaner and more intelligible audio feed, ideal for environments with dynamic speaker presence.

The SCM810AZ is equipped with eight input channels, each with individual gain adjustments and the capability to accommodate various types of microphones, from handheld to lavalier. Each channel is designed with a low-cut filter to eliminate unwanted low-frequency noise, improving overall clarity. Additionally, the mixer includes a mic preamp with high headroom, ensuring that even the loudest sources can be captured without distortion.

Another significant characteristic of the SCM810AZ is its intuitive control interface. The front panel features legible LED indicators that provide real-time feedback on levels and activity, allowing users to quickly identify which channels are active. The mixer also includes a comprehensive monitoring section, allowing operators to listen to both individual channels and the overall mix.

In terms of connectivity, the SCM810AZ provides multiple output formats, including balanced XLR and unbalanced 1/4" outputs. This versatility makes it compatible with a variety of audio equipment, ensuring seamless integration into existing setups.

Durability is key in professional audio; thus, the SCM810AZ features a rugged design suitable for both permanent installations and portable use. Its compact form factor allows for easy rack mounting, saving valuable space in equipment setups.

In summary, the Shure SCM810AZ stands out as a professional-grade automatic mixer. With its intelligent automatic mixing technology, robust input options, intuitive interface, and versatile connectivity, the SCM810AZ is an indispensable tool for achieving high-quality audio in any multi-mic environment. Whether used for conferences, broadcasts, or live performances, it delivers consistent and reliable audio performance, meeting the demands of professional sound applications.
Top Page Image Contents