Important Safeguards

When using this electrical appliance, safety precautions should always be observed, including the following:

■READ ALL OF THE INSTRUCTIONS.

■Close adult supervision must be provided when this appliance is used by or near children.

■Using attachments not recommended or sold by Keystone Manufacturing Co., Inc. may cause hazards.

■DO NOT allow the cord to hang over the edge of the counter or touch hot surfaces.

■Place the Deni Buffet Server securely in the center of the counter or work space.

■Do not place near hot gas or electric burner.

■Do not touch hot surfaces.

■Turn the thermostat to the OFF position before plugging in or unplugging.

■To disconnect, remove plug from electrical outlet.

■CAUTION: The surface will remain warm after the unit is turned off.

■Always unplug the unit before attempting to move it. Extreme caution must be used when moving appliances containing hot oil or other hot liquids.

■DO NOT operate with a damaged cord. Return the appliance to Keystone Manufacturing Company Inc. for proper service, replacement or repair immediately.

■Always unplug before cleaning and removing parts.

■Allow to cool before putting on or taking off parts.

■Always clean each part individually.

■Do not use outdoors.

■Do not use the Deni Buffet Server for other than intended use.

■Do not clean with metal scrubbing pads. Pieces can break off the pad and short circuit the electrical parts, creating the possibility of an electrical shock.

■To protect against electrical shock, do not immerse plug, cord, or motor base in water or any other liquids.

■It is recommended that you do not use an extension cord with this unit. However, if one is used, it must have a rating equal to or exceeding the rating of the appliance.

■DO NOT leave this appliance unattended while in operation.

■Do not fill trays more than 2/3 full.

■This unit is for household use only.

■This appliance is supplied with a molded 3 prong grounding-type plug and should be used in combination with a properly connected grounding-type outlet. If a grounding-type outlet is not available, an adapter may be obtained so that a 2 slot wall outlet can be used with a 3 prong plug. The adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.

SAVE THESE INSTRUCTIONS