Directed Electronics 400.2 manual Installation Guidelines

Page 6

INSTALLATION GUIDELINES

1.Please read this owner’s manual carefully before installing this ampli- fier.

2.Disconnect the battery ground terminal prior to making any elec- trical connections.

3.Check for any hazards or obstruc- tions such as gas tanks, fuel or brake lines, and wiring harnesses before mounting the amplifier.

4.Pick a mounting location that will provide adequate access and venti- lation and protect the amplifier from heat, moisture, and dirt.

5.Avoid sharp metal areas when routing cables to the amplifier, and run RCA cables away from the power cables and other potentially noisy car harnesses.

6.The amplifier should be grounded with a short, heavy gauge wire connected directly to the car at a bare metal surface, preferably scraped body sheet metal. Do not use factory ground locations, seat bolts, or brackets that are spotwelded.

7.Always fuse your power connection within 8 to 10 inches of the battery

terminal. Use a fuse or circuit breaker rated slightly more than the on-board fuse(s) of the amplifier(s). The gauge of power wire used should take into account the total current draw of the system, and the length of wire used. IASCA and other auto sound competition organizations have charts available for this; you can also find a chart in the MECP study guide. Minimum wire gauge recom- mendations for the individual ampli- fiers are listed on the specification page. Always use the same gauge wire for the amplifier ground that you use for the power wire. Be sure to examine the battery ground cable of the vehicle, and if neces- sary, upgrade it by adding an addi- tional ground wire that is the same gauge as the amplifier’s power wire. Remember, the amplifier can only deliver its rated output when it is not current limited by the power and ground supply wires.

8.This amplifier is designed to drive a speaker load that measures from 2 to 8 ohms. Keep in mind that heat is the long-term enemy of automo- tive electronics and the lower your speaker load, the more heat is

6

© 2002 Directed Electronics, Inc

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Directed Electronics, Inc Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ Variable 12 dB bass EQ functionInstallation Guidelines Wire Connector Plugs Front Panel CONNECTIONS/STATUS LED Rear Panel ConnectionsAmplifier Connections 400.2 Rear TOP Panel Controls Amplifier Controls TOPTOP Panel Features Control Panel CoverSpeaker Wiring Diagrams Crossover Settings and Gain Adjustment Specifications Viper modelPage Directed Electronics, Inc Vista, California

400.2 specifications

Directed Electronics 400.2 is a premium automotive security system that offers advanced protection for vehicles, merging state-of-the-art technology with user-friendly features. As part of Directed Electronics' esteemed legacy in vehicle security, the 400.2 model stands out for its robust characteristics designed to deter theft and unauthorized access.

One of the notable features of the 400.2 is its two-way communication system. This allows for bidirectional signal transmission between the vehicle and the remote key fob, enhancing convenience for the user. When the vehicle is armed or disarmed, the remote provides instant feedback through lights or tones, giving the vehicle owner peace of mind regarding the status of their security system.

The Directed Electronics 400.2 incorporates a powerful shock sensor that detects any impact or tampering attempts on the vehicle. This feature is crucial as it can trigger an alarm, providing an audible deterrent against potential thieves. Additionally, the system includes a built-in siren that emits a loud, startling noise to draw attention and discourage intruders.

Another significant characteristic of the 400.2 is its capability to integrate with various vehicle systems. It functions seamlessly with many types of vehicles, allowing for a customizable security setup that meets specific requirements. The system supports multiple zones of protection, which means that different areas of the vehicle can be monitored independently. This flexibility ensures comprehensive coverage.

The Directed Electronics 400.2 also features a remote start option, enabling users to start their vehicle from a distance. This function not only enhances convenience but also allows the vehicle to warm up or cool down before the driver gets in, providing added comfort in varying weather conditions.

In terms of installation, the system is designed to offer a straightforward setup process. Directed Electronics provides clear instructions, making it easier for both professional installers and DIY enthusiasts to get the system up and running effectively. The compact design of the module means it can be installed discreetly within the vehicle.

Overall, the Directed Electronics 400.2 stands as a hallmark of automotive security technology, combining user-friendly features, extensive compatibility, and advanced safety measures that help protect vehicles from theft and damage. With its innovative approach to vehicle protection, the 400.2 remains a top choice for those seeking reliable automotive security solutions.
Top Page Image Contents