TOP Panel Features

Control Panel Cover

The amplifier’s gain and filter controls are mounted under the elliptical control panel cover. Magnets hold the cover snugly and allow easy access.

To install the cover - Place the straight end of the control panel cover into the notched end of the amplifier’s top panel while elevating the curved end. Lower the curved end of the cover until the magnets make contact.

To remove the cover - Place a finger on the curved end of the cover while lifting up the straight end with your thumb. When the magnets lose contact, lift and remove the cover.

Illuminated Window Alignment

The illuminated window comes attached to the control panel cover with a light adhesive tape. An additional supply of precut adhesive tape is included in the hardware pack.

1.Firmly hold the control panel cover while gently pressing against the window from the top. If the window will not release easily use a small flat tool to pry it loose. Pry slowly and evenly from several points to avoid deforming or cracking the window.

2.Apply two of the precut pieces of adhesive tape to the corners of the window that don't have tape. Make sure to apply the tape to the side that makes contact with the cover. Save the other two precut pieces of tape for future use.

3.Turn the illuminated window so the Viper snake logo will be in an upright position when the cover is re-attached to the amplifier. Press the window onto the underside of the control panel cover using the positioning pins for alignment.

Viper Badge Mounting

The Viper Badge can be rotated in 90- degree increments to accommodate the amplifier’s final mounting position.

1.Determine the final mounting posi- tion of the amplifier.

2.Determine the position required for the badge to be viewed horizontally.

3.Remove the protective cover for the adhesive tape on the under side of the badge.

4.Align the badge guideposts with the holes in the amplifier top panel.

5.Press down firmly until the logo is securely attached to the amplifier.

550.6 specifications

Directed Electronics 550.6 is a state-of-the-art vehicle security system designed to provide comprehensive protection for a wide range of automobiles. This advanced system stands out for its blend of innovative technologies and user-friendly features, making it a popular choice among car owners looking to enhance their vehicle's security.

One of the key features of the Directed Electronics 550.6 is its two-way communication system. This allows users to receive alerts and notifications directly on a handheld remote control, keeping them informed about their vehicle’s status at all times. The remote control features a backlit display, which makes it easy to read even in low-light conditions. This convenience ensures that users can monitor their vehicle effortlessly.

Another significant aspect of the 550.6 is its advanced immobilization technology. This feature prevents unauthorized access to the vehicle by disabling vital functions when a breach is detected. With a built-in automotive-grade shock sensor, the system can detect any attempts at forced entry or tampering. Additionally, the progressive sensitivity settings allow users to customize their security preferences based on their specific needs and the environment in which their vehicle is parked.

The Directed Electronics 550.6 also integrates a starter interrupt feature, providing an extra layer of security by disabling the engine when an unauthorized attempt is made to start the vehicle. This ensures that even if an intruder gains access to the interior of the car, they will not be able to drive away.

Furthermore, the system includes a comprehensive alarm siren, which is loud enough to draw attention and deter potential thieves. The audible alert capabilities combined with the visual indicators from the remote serve to maximize the vehicle’s security profile.

Another attractive feature of the 550.6 is its ease of installation. Designed with both novice and professional installers in mind, it comes with a user-friendly installation guide that makes setup straightforward. This simplicity further enhances the appeal of the Directed Electronics 550.6, allowing car owners to enjoy peace of mind without needless complexity.

In conclusion, Directed Electronics 550.6 delivers a robust and reliable vehicle security solution characterized by two-way communication, advanced immobilization technology, shock sensors, and an effective alarm system. Its blend of innovative features and user-centric design makes it a formidable guardian against theft and unauthorized access, ensuring that car owners can enjoy their vehicles with confidence.