KH525_IB_UK 06.07.2006 10:16 Uhr Seite 9
KH 526
Warning: Risk of injury! Due to the sharp cutting blades and the glass mixing unit proceed with great care.
Remove the measuring cap from the lid and place the mixing unit on the lid, so that the underside is facing upwards.
Insert the locking snibs of the measu- ring beaker in the rabbets of the locking ring on the underside of the mixing unit.
Turn the measuring beaker counter- clockwise.
Remove the locking ring.
With great care remove the cutters and the sealing washer.
Danger of Injuries: Clean the cutters very carefully. They are very sharp.
After Cleaning
Replace the sealing washer, the cut- ters and the locking ring to their positions.
Insert the locking snibs on the measu- ring beaker in the rabbets of the locking ring on the underside of the mixing unit.
Turn the measuring beaker clockwise, so that the locking ring once again sits firmly on the mixing unit.
The mixing unit can again be uptur- ned and the measuring beaker placed onto the lid.
Disposal
Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility. Observe the currently valid regulations. In case of doubt, consult your waste di- sposal facility.
Information
Service
Please refer to the guarantee card for the Authorized Service Outlet in your country.
Kompernaß GmbH
Burgstrasse 21
44867 Bochum
Deutschland / Germany
www.kompernass.com
Subject to technical changes.
- 9 - |