30" Combination Installation –
Built-In Microwave/Single Wall Oven/Warmer Drawer
For detailed product dimensions and installation specifications, refer to
30" |
|
|
| |
Microwave Cutout | 21" min. | |||
For models: | 211/2" max. | |||
E30MO75HPS | 2" |
|
| |
E30MO75HSS |
|
| ||
(visible | ||||
| ||||
| gap)* | |||
30" Electric Single |
|
|
| |
|
|
| ||
Wall Oven Cutout |
|
|
| |
28 1/2" min. | ||||
For models: | ||||
28 7/8" max. | ||||
E30EW75GPS |
|
|
| |
|
|
| ||
E30EW75GSS |
|
|
| |
|
|
|
| |
| 13/4" min.† | |||
30" Warmer |
|
|
| |
|
|
| ||
Drawer Cutout | 9 7/8" min. | |||
For models: | 10 1/4" max. | |||
E30WD75GPS |
|
|
| |
E30WD75GSS | 41/2" min. |
|
| |
| ||||
E30WD75GTT | required |
|
|
24" min. | 30 1/8" min. |
| 6" |
| 4" |
28 1/2" min. | 18" |
28 3/4" max. |
|
| C |
| L |
28 1/2" min. | 24" min.** |
(critical | |
28 3/4" max. | dimension) |
28 1/2" min. 28 3/4" max.
120V/60 Hz grounded electrical outlet should NOT be located within shaded area
Full plywood base required to support 150 lbs.
Two 3" wide by 3/4" thick planks must be installed, capable of supporting 200 lbs.
Bottom of
oven cutout
11 5/8" min.**
(critical
dimension)
*Minimum 2 1/8" clearance required from bottom of
**Critical dimension – MUST be applied
†Maximum height depends on critical dimension (11 5/8")
††Electrical junction box for Wall Oven must be lower than the Warmer Drawer cutout
3" max. | †† |
|
Full plywood base required to support 100 lbs.
Electrical junction box location
4"x 4" opening to route armoured cable
30" Combination Installation Specifications
•Always consult local and/or national electric codes.
(Refer to product-specific electrical specifications on this page.)
•Minimum 24"deep cutout dimension is critical for proper combination installation, to ensure that each
•Bases must be level and cabinet front must be square.
•Minimum
•Respect critical dimensions as noted for proper installation of
•Minimum
30" Built-In Convection Microwaves Specifications
•Product Weight – (E30MO75HPS/E30MO75HSS) 84 Lbs.
•Voltage Rating – 120V/60Hz/15 Amps
•Connected Load (kW Rating) @120 Volts = 1.6kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @120 Volts =13.7 Amps
•Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs.
•Minimum
30" Electric Single Wall Ovens Specifications
•Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
•Single phase 3- or
•Connected Load (kW Rating) @ 240/208 Volts = 4.0/3.0kW
•Amps @ 240/208 Volts =16.6/14.4 Amps
•To support Wall Oven, two
30" Warmer Drawers Specifications
•Product Weights – (E30WD75GPS/E30WD75GSS) 49 Lbs. / (E30WD75GTT) 41 Lbs.
•Voltage Rating – 120V/450W/60Hz/15 Amps
•Connected Load (kW Rating) @120 Volts = 0.45kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @120V = 3.75 Amps
•Full base of solid plywood or similar material required, capable of supporting 100 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.
Electrolux Major Appliances, N.A.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • | High standards of quality at Electrolux Home Products, Inc. mean we are |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | constantly working to improve our products. We reserve the right to change |
specifications or discontinue models without notice. |
MODD_EW_WD INST 03/09 | © 2009 Electrolux Home Products, Inc. | Printed in the U.S.A. |