Electrolux ER 6632 manual Building, Instructions for totally built-in appliance

Page 16

Building in

Instructions for totally built-in appliance

Dimensions of the recess

Height of housing

880 mm

Depth of housing

550 mm

Width of housing

560 mm

For appropriate venting, follow indications in the figure.

Push the appliance into the housing until stop strip

(A) touches the kitchen unit.

If after having carried out the operation described in section 2 there is still some space left between the appliance and the kitchen unit, fit the trimming provided together with the appliance on the stop strip

(A).

Open the door and push the appliance against the side of kitchen furniture opposite to that of appliance hinges.

Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grille (C) and hnge cover (D) into position.

The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom.

16

Image 16
Contents F O Contents Important Safety Instructions Description of the Appliance Setting the temperature OperationBefore use Fresh food refrigerationHealth and Safety Guidelines Defrosting Normal Operating SoundsMaintenance and Cleaning Internal cleaningWhen the appliance is not in use Changing the light bulbSymptom Solution Something not Working?Customer Care Department Service and Spare Parts0870 5 Guarantee Conditions Standard guarantee conditionsPage Page Installation Technical specificationsPositioning Electrical Connection Green and Yellow Earth Blue Neutral Brown LiveBuilding Instructions for totally built-in appliance8mm