Electrolux EI28BS51IS Built-In Look, Cutout Dimensions, Electrolux Major Appliances, N.A

French Door Refrigerators

EI28BS51I S, EI28BS51I W, EI28BS51I B

	Overall depth at center
	of arc – 33"	313/4"
		35 5/8"
		C
	Standard	L
	Refrigerator Depth
	vs. Counter Depth		69	1/2"
	Counter Depth	7	with
			3/8"
	5	4 /8"
	23 /8"		rollers
A
			68 3/16"	Water
			with	line inlet
			3/8"	location
			rollers	(left
C				bottom
				rear)
B
“Built-In Look”	281/2"			Power
				cord
Cutout Dimensions	Standard Depth			location
				(right
(A) 70 1/4" (B) 36" (C) 287/8"				bottom
				rear)

Top View	Recessed	Recessed
	water line	electrical outlet
	Allow 1" min. clearance at rear
	for proper air circulation and
24"	water / electrical connections		25"
Cabinet			Countertop

	28 1/2"
353/4"
	54 3/4"
	(with drawer
47 7/16"(with doors	fully extended
	including handle)
90° open)

287/8" Side Panels, 1/2" min. width

Standard-Depth French Door Refrigerator Specifications

•Product Weight – 355 Lbs.

•An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances.

•Voltage Rating – 120V/60Hz/15 or 20 Amps

•Connected Load (kW Rating) @120 Volts = 1.02kW

•Amps @120 Volts = 8.5 Amps

•Always consult local and national electric & plumbing codes.

•Floor should be level surface of hard material, capable of supporting fully loaded refrigerator.

•When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer/crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90°door swing which will provide drawer/crisper access with restricted removal.)

•For proper ventilation, front grille MUST remain unobstructed.

•Recess electrical outlet when possible.

•Water recess on rear wall recommended to prevent water line damage.

•Water Pressure – Cold water line must provide between 30 and 100 pounds per square inch (psi).

•Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available.

•Adjustable front rollers to assist with door alignment.

“Built-In Look” Specifications

•Minimum opening of 70-1/4"H x 36"W x 28-7/8"D required to allow for ease of installation, proper air circulation, and plumbing/electrical connections.

•Remove all wall/floor molding prior to installation.

•To ensure optimum performance, avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source.

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions.

Electrolux Major Appliances, N.A.

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com	High standards of quality at Electrolux Home Products, Inc. mean
	we are constantly working to improve our products. We reserve the right
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca
	to change specifications or discontinue models without notice.

EI28BS51I 09/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.