•Reinsert the door .
•Pay attention that the front board of the doors are parallel to the front board of the top.
•Fix the door stopper on the opposite side.
•Position and fix the upper hinge (that can be found in the instruction for use bag) on the opposite side .
•Fix the screw of the new cover hinge (that can be found in the instruction for use bag).
•Lift up the appliance to vertical position.
•Open the door and reposition the upper door plastic trim with screws.
•Fix the handle on the opposite side, insert the plastic plugs into the holes left open that can be found in the instruction for use bag.
Reposition, level the appliance, wait for at least two hours and then connect it to the power socket.
electrolux 23
In case you do not want to carry out the above mentioned operations, contact your local Service Force centre. The engineer will carry out the reversibility of the doors at your cost.
Warning
After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer. Lay the appliance on its back side.