Electrolux ERCG9030AS, ERCE9020AS, ERCM9010AS Maintenance and cleaning, Changing the halogen lamps

electrolux e:line rangehoods using the rangehood 7

Using the rangehood – ERCE9020AS Using the rangehood – ERCG9030AS

1 min.

low

medium

high

light

auto off

OFF

boost

lock

low

medium

high

light

auto off

OFF

boost

Maintenance and cleaning

caution

• Before maintenance or cleaning is carried out,

the canopy rangehood should be disconnected

from the main power supply. Ensure that the

rangehood is switched off at the wall socket

and the plug removed.

electrolux e:line rangehoods maintenance / halogen lamps 8

Changing the halogen lamps

Touch screen operation

Lock – Touch and hold ‘lock’ button for 3 seconds to lock control interface when cleaning, touch and hold for 3 seconds to unlock control interface.

Fan – select speed to suit cooking conditions. Low – light frying/boiling

Medium – frying/wok cooking/heavy boiling High – grilling, intensive frying and wok cooking

Boost – increases air extraction when intense cooking & frying is taking place, which is generally over a short time frame when searing foods. On selecting the boost function the fan intensity will increase for 1 minute, then revert back to the last selected fan speed.

Touch screen operation

Lock – Touch and hold ‘lock’ button for 3 seconds to lock control interface when cleaning, touch and hold for 3 seconds to unlock control interface.

Fan – select speed to suit cooking conditions. Low – light frying/boiling

Medium – frying/wok cooking/heavy boiling High – grilling, intensive frying and wok cooking

Boost – increases air extraction when intense cooking & frying is taking place, which is generally over a short time frame when searing foods. On selecting the boost function the fan intensity will increase for 1 minute, then revert back to the last selected fan speed.

• External surfaces are susceptible to scratches

and abrasions, so please follow the cleaning

instructions to ensure the best possible result is

achieved without damage.

Stainless steel surface

Clean stainless steel surfaces using non-abrasive cleaning products that are specifically for use on stainless steel.

To ensure best results also use an even pressure and follow the grain of the stainless steel. Use of a soft cloth reduces the risk of scratching. If the cloth is wet ensure that a dry soft cloth is used to wipe down the surface again reducing the risk of any surface rust appearing.

Control panel surface

Using a small flat blade screwdriver remove the inner stainless steel ring to obtain access to the halogen globe. When removing the inner ring, do so carefully, as the glass lens could easily fall out of the inner ring. Remove halogen globe, whilst cool, and replace carefully with a new globe.

The rangehood takes 2 x 20W, 12 volt halogen globes.

important

When handling globes hold with a cloth or gloves to ensure perspiration does not come in contact with the globe as this can reduce the life of the globe.

To switch Lights ON and OFF

Touch the ‘light’ button to turn the lights ON and touch ‘light’ button again to turn the lights OFF.

Using the Timer

At the end of cooking if the timer is switched on, the rangehood will continue to run for an additional 5 minutes to remove any odours that remain at the completion of cooking. After 5 minutes the canopy will turn itself OFF.

Auto Off

Touch ‘auto off’ button to turn the timer ON and touch ‘auto off’ button again to cancel the timer function.

To switch Lights ON and OFF

Touch the ‘light’ button to turn the lights ON and depress ‘light’ button again to turn the lights OFF.

Using the Timer

At the end of cooking if the timer is switched on, the rangehood will continue to run for an additional 5 minutes to remove any odours that remain at the completion of cooking. After 5 minutes the canopy will turn itself OFF.

Auto Off

Touch ‘auto off’ button to turn the timer ON and depress ‘auto off’ button again to cancel the timer function.

The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.

Grease filters

The mesh filters can be cleaned either by hand or in the dishwasher. After cleaning ensure that the filters are completely dry before refitting.

By hand: Soak in warm water and some washing up liquid. For stubborn grease stains use a soft nylon brush to help remove these stains.

In a dishwasher: Ensure that placement of the filters is made so as to not impede the function of the spray arm. Washing the filters in a dishwasher may cause discolouration of the aluminium inner mesh over time although it will not affect their performance. Filters should be washed separately to crockery and kitchen utensils.

Glass fascia

The glass fascia on model ERCG9030AS can be cleaned with window cleaner or a mild detergent and hot water and paper towelling.

EMAN_ElineRHood_Jun11.indd 8-9

24/06/11 2:44 PM