What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can recti- fy yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case.
Important! Repairs to refrigerators/freezers may only be performed by competent service engineers. Improper repairs can give rise to signifi- cant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Service Force Centre.
Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
| Appliance is not switched |
| Switch on the appliance. | |
|
| on. |
| |
|
|
|
| |
|
|
|
|
|
|
| Mains plug is not plugged |
| Insert mains plug. |
|
| in or is loose. |
| |
|
|
|
| |
Appliance does not work. |
|
|
|
|
| Fuse has blown or is | Check fuse, replace if | ||
|
| defective |
| necessary. |
|
|
|
|
|
|
|
| Mains malfunctions are to | |
|
| Socket is defective. |
| be corrected by an electri- |
|
|
|
| cian. |
Appliance cools too much.
The food is too warm.
Interior lighting does not work.
Temperature is set too cold.
Temperature is not proper- ly adjusted.
Door was open for an extended period.
A large quantity of warm food was placed in the appliance within the last 24 hours.
The appliance is near a heat source.
Light bulb is defective.
Press „+“ (WARMER) button.
Please look in the “Starting up and Temperature regu- lation” section.
Open the door only as long as necessary.
Turn the temperature regulator to a colder set- ting temporarily.
Please look in the “Installation location” section.
Please look in the “Changing the light bulb” section.
22