Operating instructions
If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid must be placed in the detergent compartment. In this case the rinse aid dispenser must be deactivated in order to avoid a double dosage.
Deactivation/activation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been deactivated, also the rinse aid indicator light on the control panel is automatically deactivated.
1.Press the On/Off button. All programme selection buttons indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is illuminated, this means that a washing programme has been selected.
The programme must be cancelled:
press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme selection buttons will illuminate indicating that the set programme has been cancelled and that the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, the indicator lights of function buttons 1, 2 and 3 start flashing.
3.Press function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of button 2 goes on flashing, the digital display indicates the current setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated (factory setting)
4.To change the setting, press again function button 2, the digital display indicates the new setting.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
16