Electrolux KDW 3 manual There are problems with the operation of the dish- washer

Page 27

Operating Instructions

...there are problems with the operation of the dish- washer.

	Symptom	Possible Cause	Solution
		The door of the dishwasher is	Shut the door.
		not closed properly.	Shut the door.
		not closed properly.
	The programme does	Mains plug is not plugged in.	Insert mains plug.
	The programme does	House fuse is defective.	Replace fuse.
	not start.	House fuse is defective.	Replace fuse.
			If the dishes are to be
		A start delay is selected.	washed immediately, set the
			start delay to 0 hours
		The washing compartment is	Only wash cutlery and dishes
		made from rust-free stainless	that are suitable for dish-
		steel. Rust spots in the wash-	washer use.
		ing compartment are due to
	Rust spots are visible in	rust particles from external
	the washing compart-	sources (rust particles from
	ment.	water pipes, pans, cutlery,	Close the lid of the special
		etc.). Remove such spots with	Close the lid of the special
		etc.). Remove such spots with	salt container securely.
		one of the stainless steel	salt container securely.
		one of the stainless steel
		cleaners that are generally
		available on the market.
	There is a whistling	The whistling is not a cause	Use a different brand of
	noise during washing.	for concern.	detergent.

...the wash results are not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were loaded is such a way that the wash waster did not reach all items. The racks for the dishes must not be overloaded.

–The filter in the base of the washing compartment is dirty or incor- rectly positioned.

–Detergent was not used or too little was used.

–In the case of scale deposits on the dishes: The special salt container is empty or the water softener is incorrectly adjusted.

–The drain hose is incorrectly laid.

The dishes are wet and dull.

–Rinse aid was not used.

–The rinse aid container is empty.

27

Image 27

Contents KDW Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Prior to using for the first time Indicators have the following meaningsControl panel Hardness range of the water in your area Adjust the Water SoftenerTurning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower RackFill with rinse aid Filling with Rinse AidOugh rinsing, spot and streak free drying Age the applianceReplace the lid and tighten by turn- ing clockwise Adjusting Rinse Aid DosingLoading Cutlery and Dishes Daily UseLoading Cutlery Load large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans and Large PlatesLoading Cups, Glasses Coffee Services Pull out the upper rack to the stop Adjusting the Height of the Upper RackLowering the Upper Rack Raising the Upper RackTions given on the detergent packaging Filling with DetergentUse only dishwasher detergent Fill with DetergentDetergent Recommendations Bio Wash Programmes and Concentrated DetergentsSoiling Selecting the Wash Programme Programme TableChanging the wash programme Changing/Interrupting/CancellingStart the Wash Programme Wash ProgrammeLoad Sensing Sensor Logic Care and Cleaning Switching Off the Dishwasher Emptying the Dishwasher Cleaning the Filter What to do, if Error messagesDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Bottom rack with cutlery basket An open-end spanner Screwdriver Installing the DishwasherDishwashers That Can Be Integrated Built-In DishwasherFree-Standing Appliances Work surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesLeak Prevention System Electrical ConnectionChanging a fuse Installation and Connection Instructions Connections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes