Electrolux F50674 user manual Installation, Fitting under a counter kitchen worktop or sink

Page 32

32Installation

Installation instructions

Installation

WARNING!

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter (kitchen worktop or sink)

By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

1. Remove the machine's worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

2.Insert the machine after adjusting the levelling with the adjustable feet.

Image 32

Contents Favorit Dear Customer Contents Installation instructions Safety information Correct useInstallation General safetyChild safety Product description Indicator lights Control panelSetting mode Function buttonsFirst use Set the water softenerSetting manually Setting electronicallyTo fill Use of dishwasher saltExamples Use of rinse aid Only use branded rinse aid for dishwashersAdjusting the dosage of rinse aid Daily useLoading cutlery and dishes Lower basket Cutlery basket Upper basket Use of detergent Fill with detergentMulti-tab function Detergent tabletsActivation/deactivation of the Multi-Tab function Activation/deactivation of the rinse aid dispenserWashing programmes Select and start a washing programmeSetting and starting the programme with delay start Cancelling the delay start and / or a washing programmeCare and cleaning Cleaning the filtersUnloading the dishwasher Interrupt a washing programme in progressClean all filters thoroughly under run- ning water Cleaning the spray arms External cleaningInternal cleaning Frost precautionsWhat to do if Moving the machineProgramme does not start Technical data Technical dataHints for test institutes Example loading arrangementsLower basket with cutlery basket Cutlery basket Proceed as follows InstallationFitting under a counter kitchen worktop or sink Locknut must be correctly fitted to avoid water leaks LevellingWater supply connections Water outlet hose connection Electrical connection Sink trap spigot, the entire plastic memEnvironment concerns Packaging materialPage Page Page Subject to change without notice

F50674 specifications

The Electrolux F50674 is an advanced vacuum cleaner that exemplifies a blend of efficiency, design, and innovation, tailored to meet the demands of modern households. With its sleek and ergonomic design, the F50674 not only looks appealing but also ensures ease of use and maneuverability.

One of the standout features of the Electrolux F50674 is its powerful suction capacity, which is bolstered by its state-of-the-art motor technology. The vacuum is designed to deliver consistent performance, effectively capturing dirt, dust, and allergens from various surfaces including carpets, hard floors, and upholstery. This makes it especially suitable for households with pets or allergy sufferers, ensuring a cleaner and healthier living environment.

The F50674 is equipped with advanced filtration systems, including a HEPA filter that traps 99.97% of particles as small as 0.3 microns. This technology is crucial for minimizing allergens in the air and supporting better indoor air quality. Furthermore, the filter is washable, which adds to the vacuum's eco-friendliness and cost-effectiveness over time.

In terms of user convenience, the Electrolux F50674 boasts a lightweight design and a long power cord, allowing for extended reach without the need for frequent outlet switching. The vacuum features a range of attachments, including a crevice tool, upholstery nozzle, and dusting brush, ensuring that users can effectively clean various surfaces and hard-to-reach areas.

The vacuum also incorporates smart technology with features such as adjustable suction power. This allows users to customize the suction based on the surface type being cleaned, optimizing performance while conserving energy. Additionally, the vacuum is designed with quiet operation in mind, making it an ideal choice for households where noise could be disruptive.

With its combination of powerful suction, advanced filtration, user-friendly design, and smart technologies, the Electrolux F50674 stands out as a versatile and effective cleaning solution for any home. Whether tackling daily messes or deep cleaning tasks, this vacuum cleaner is engineered to provide reliable performance and satisfy the cleaning needs of today's consumers. Investing in the Electrolux F50674 means choosing a cleaner that prioritizes efficiency, health, and convenience for a superior cleaning experience.