Electrolux ESL 6225 Starting a dishwashing cycle, Load Sensing, Changing a dishwashing cycle

Page 23

Starting a dishwashing cycle

1.Check that the dishes and cutlery are stacked in the dishwasher in such a way that the spray arms are free to rotate.

2.Turn on the tap fully.

3.Press the ON/OFF button.

The LED indicators for all the buttons in the con- trol panel that are now able to be selected will become illuminated.

4.Press the relevant button for the cycle required (see “Programme Table”).

The cycle display will become illuminated.

5.Close the dishwasher door. The dishwashing cycle will begin.

3If an acoustic error message can be heard after the cycle has begun, please read the section “What to do if ...”.

Changing/interrupting/cancelling a dishwashing cycle

3Only change or interrupt a dishwashing cycle that is in progress if it is absolutely neces- sary. After the appliance has been closed again, the air that has entered will be heated significantly and expand. As a result, water may collect in the base of the appliance and trigger the anti-flood system.

Changing a dishwashing cycle

3If you would like to change the dishwashing cycle before closing the dishwasher door, briefly press the button for the new dish-

washing cycle.

If you would like to change the dishwashing cycle after the cycle has commenced, proceed as follows:

1Hot steam may escape when the dishwasher door is opened. There is a risk of scalding. Be careful when opening the door of the dishwasher.

1.Open the door of the dishwasher. The dishwash- ing cycle will stop.

2.Press the button for the new dishwashing cycle and hold it down.

First, the indicator for the dishwashing cycle that is currently running will flash.

After several seconds only the indicator for the new dishwashing cycle will be flashing.

3.Release the cycle button.

4.Close the dishwasher door. The newly selected dishwashing cycle will commence from the begin- ning.

Interrupting the dishwashing cycle by opening the dishwasher door

1.Open the door of the dishwasher. The dishwash- ing cycle will stop.

2.Close the dishwasher door. The dishwashing cycle will continue.

Cancelling the dishwashing cycle (RESET)

1.Open the door of the dishwasher.

2.Press function buttons 2 and 3 for approx. 1 sec- ond and keep them pressed.

The LED indicators for all the buttons in the con- trol panel that are now able to be selected will become illuminated.

3.Release the function buttons.

The dishwashing cycle has been aborted.

4.Switch off the dishwasher by pressing the ON/ OFF button.

Load Sensing

If a wash programme is started even though there are only a few dishes in the upper and/or lower basket, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.

23

Image 23
Contents User Instructions Dear customer Contents Contents General Safety Safety InstructionsInstallation, Connection and Plac- ing into Operation Child SafetyDisposal of old appliances DisposalEconomical and Ecological Dishwash- ing Disposing of the Packaging MaterialAppliance Features, Display and Control Panel Function button Prior to using for the first timeDisplay and control panel Water softener Setting the water softenerSetting manually Range Tic signals1Setting electronically Water can be softened in one of two ways Setting the amount of special salt to be addedSpecial salt for the water softener Adding special salt Rinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Adding rinse aid Adjusting Rinse Aid DosingActivating/deactivating the acoustic signal Loading cutlery and dishes Daily UseLoading Cutlery Loading Pans, Frying Pans and Large Plates Raising the Upper Basket Loading Cups, Glasses and Coffee ServicesAdjusting the Height of the Upper Basket Lowering the Upper BasketFill with detergent Filling with DetergentConcentrated Detergent General AdviceSpecial Advice Use of 3 in 1/ Combi Detergent TabletsSelecting the Wash Programme Programme Table Load Sensing Changing/interrupting/cancelling a dishwashing cycleCancelling the dishwashing cycle Reset Starting a dishwashing cycleUnload the dishes Switching off the dishwasherCleaning the Filter Care and CleaningWhat to do if Error messages are displayedDishes are wet and dull There are problems when operating the dishwasherWash results are unsatisfactory Dishes are still dirtyDishwashers that Can Be Fully Integrated Technical DataDishwasher Free-Standing Appliances Dishwashers that Can Be Integrated, Built-In DishwashersFull Load Half Load Page Installing the Furniture Door Installing the DishwasherConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveLeak Prevention System Water drainGreen and Yellow Earth Blue Neutral Brown Live By the earth symbol Or coloured green and yel LowElectrical Connection Changing a fuseConnections This guarantee does not cover Guarantee ConditionsStandard guarantee conditions European GuaranteePage Customer Care 08705 929Electrolux plc

ESL 6225 specifications

The Electrolux ESL 6225 is a sophisticated built-in dishwasher that epitomizes modern kitchen efficiency and design. With a capacity of up to 13 place settings, it is perfect for families or those who entertain frequently. This model offers a range of features aimed at ensuring effective cleaning while maintaining energy efficiency.

One of the standout characteristics of the ESL 6225 is its A++ energy rating, ensuring that it consumes less energy without compromising on performance. Equipped with various wash programs, including Intensive, Normal, and Eco, this dishwasher allows users to tailor the washing process according to the type and level of soiling on their dishes. The eco-friendly option is particularly notable for those conscious of their environmental impact.

Another innovative technology featured in the Electrolux ESL 6225 is the Satellite Clean system. This cutting-edge technology utilizes a unique spray arm that rotates in a two-dimensional motion, providing an extensive coverage area. This results in improved water distribution, which enhances cleaning efficiency and ensures that even the most stubborn food residues are removed effectively.

The dishwasher is also designed with noise reduction in mind, operating at a mere 45 dB, making it one of the quieter models on the market. This low noise level is a significant advantage for homes where open-plan living is common, allowing users to operate the appliance without it interrupting daily activities or conversations.

The user-friendly interface includes a digital display that provides clear feedback on the selected program and cycle duration, making it easier for users to monitor the washing process. Additionally, the delay start function allows users to set the dishwasher to begin at a more convenient time, further enhancing its practicality.

Durability is also a hallmark of the ESL 6225, given its solid build quality and high-grade materials. The stainless-steel interior not only adds to the overall aesthetic appeal but also contributes to better hygiene by resisting stains and odors.

In summary, the Electrolux ESL 6225 dishwasher combines a sleek design, innovative technologies, and user-friendly features, making it a reliable addition to any modern kitchen. Whether for everyday use or for hosting gatherings, this appliance ensures that dishes are impeccably cleaned while remaining energy-efficient and quiet.