Electrolux ESL 66910 user manual Kind of tablets you choose 3 in 1, 4 in 1, 5 in 1 etc, Again

24 electrolux daily use

"Multi-tab function"

This appliance is equipped with the "Multi-tab function", that allows the use of combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which

kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...)

Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

Once this function is selected it will remain active also for the following washing programmes.

With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the "Multi-tab function" before the start of a washing programme.

With the use of the Multi-tab function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.

Once the programme is running, the		NO
"Multi-tab function" can			longer be
changed. If you want to exclude the
"Multi-tab function" you have to cancel
the programme setting and then
deactivate the "Multi-tab function".
In this case you have to set a
washing	programme (and desired
options)	again.

Activation/deactivation of the Multi- tab function

Simultaneously press and hold the two buttons positioned over the symbol Multi-tab, until the Multi-tab function indicator light illuminates. This means that the function is active.

To deactivate the function press the same buttons again until the indicator light corresponding to the Multi-tab symbol turns off.

If the drying results are not satisfactory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

●The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-tab function" active.