Electrolux ESL 2435 manual Water inlet, Water drainage

Page 21

Installation

Water inlet

The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are ac- cording to current water technical safety regulations.

The dishwasher should be permanently plumbed into a separate cold water supply.

The water pressure must be within the limits given in the technical specifications, as it will not function correctly if pressure is outside these specifications.

Your local Water Authority will advise you on the average mains pressure in your area. Where the water is supplied from a cold water cistern you can work out the pressure yourself by measuring the vertical distance (or ‘Head’) between the dishwasher’s inlet hose and the outlet from the cold water storage cistern; allowing .86 psi for every 2 feet under normal conditions.

We would advise you to have a shut-off valve or stop- cock in the water supply pipe close to the dishwasher and accessible for easy use. This should be turned off when the appliance is not in use. Connect the inlet hose to a tap with a 3/4" pipe thread.

The inlet hose must not be joined onto any form of exten- sion hose. If it is too short, the entire hose must be repla- ced with a longer high-pressure hose, specially designed for the purpose. The end of the hose, which is connected to the dishwasher can be turned in any direction. Loosen the retaining nut, turn the hose, then retighten the nut.

Check that the nut and all other connections are tight before the machine is moved into position.

Use only the inlet hose supplied to the dish- washer. Do not reuse an inlet hose used with a previous machine.

Water drainage

To protect the dishwasher against water damage it is equipped with a water safety system. In the event of a fault the drain-pump starts automatically and the remaining water inside the dishwasher is pumped out.

The water safety system also works when the dishwasher is switched off. However the dish- washer must be connected electrically.

The discharge hose must not at any point be higher up than 75 cm over the surface which the dishwasher is standing on. If it runs higher, operation of the dishwasher might be impaired. The hose should always be routed at the level which the dishwasher is standing on, rising up only where it meets the waste pipe.

It is also important to ensure that the inside diameter of the hose is not less than 13 mm at any point.

- 21 -

Image 21
Contents Page Contents Installation and servicing Safety informationChild Safety DisposalDescription of the appliance Coarse strainer/microfilter Spray armFine filter Detergent dispenserSwitching the buzzer off Setting the delay startControl panel Water softener Adjusting the water softenerProgramme chart Use care when opening the door as hot steam may escape How to load the dishesLoading and unloading the dishwasher UnloadingUsing the appliance Maintenance and cleaning Something Not Working Fault CheckService and Spare Parts ServiceThis guarantee does not cover Guarantee ConditionsTechnical specifications Installation instructionsUnpacking DamagesUse Installation PositionMeasurements for fitting a wooden door Mount plate Preparing the outer doorFitting protective and infill strips Fitting the outer doorInstalling the dishwasher Water drainage Water inletGreen and Yellow Earth Blue- Neutral Brown- Live Power supplyInformation for test centres

ESL 2435 specifications

The Electrolux ESL 2435 is a sleek and efficient built-in dishwasher that caters to modern kitchen dynamics with its innovative features and practical functionalities. Measuring compactly for space-saving installation, this model is a perfect fit for various kitchen layouts, effortlessly blending under countertops while providing superior dish cleaning capabilities.

One of the standout characteristics of the Electrolux ESL 2435 is its remarkable energy efficiency. It operates at a low energy consumption level, earning it top ratings in energy saving, which is beneficial for environmentally conscious consumers. This appliance helps reduce electricity bills while ensuring that your dishes receive a thorough clean.

The ESL 2435 incorporates multiple washing programs designed to cater to a diverse range of cleaning needs. Options include Intensive, Eco, and Quick Wash cycles, allowing users to select the most appropriate setting based on the load and level of soiling. The Quick Wash cycle is particularly helpful for busy households, cleaning lightly soiled dishes in approximately 30 minutes.

One of the technological advancements in the Electrolux ESL 2435 is its Air Dry feature. This function drastically enhances drying performance by using a fan to accelerate the drying process after the wash cycle is complete, leaving dishes sparkling and ready to use without the need for towel drying.

Noise levels remain low with this model, making it a suitable choice for open-plan living spaces. Operating quietly at just 46 dB, it maintains a peaceful atmosphere while ensuring that cleaning chores are seamlessly managed.

The interior of the ESL 2435 is designed with versatility in mind. It comes equipped with adjustable dish racks, allowing users to customize the space based on the size and shape of dishes, pots, and pans. The large capacity means it can handle up to 13 place settings, making it ideal for families or those who entertain frequently.

Another feature of the Electrolux ESL 2435 is its user-friendly LED display, which provides clear feedback on the selected cycle and remaining time. Additionally, the appliance boasts a delayed start function, allowing users to set the dishwasher to operate at a more convenient time, optimizing energy use.

In conclusion, the Electrolux ESL 2435 stands out for its efficiency, versatile cleaning programs, and thoughtful design elements. Combining functionality with modern aesthetics, it is an excellent addition to any kitchen, promoting a cleaner and more organized lifestyle while enhancing the dishwashing experience.