Multi-tab function

This appliance is equipped with the Multi-tab function, that allows the use of combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...)

Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

Once this function is selected it will remain active also for the following washing programmes.

With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the Multi-tab function before the start of a washing programme.

With the use of the Multi-tab function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.

Once the programme is running, the ‘Multi-tab function’ can NO longer be changed. If you want to exclude the Multi-tab function you have to cancel the programme setting and then deactivate the Multi-tab function.

In this case you have to set a washing programme (and desired options) again.

daily use electrolux 23

Activation/deactivation of the Multi- tab function

Simultaneously press and hold the two buttons positioned over the Multi- tab symbol, until the Multi-tab function indicator light illuminates. This means that the function is active.

To deactivate the function press the same buttons again until the Multi-tab indicator light turns off.

If the drying results are not satisfactory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

●The activation/deactivation of the rinse aid dispenser can only be possible with the Multi-tab function active.