Electrolux ESF 4120 manual Fitting under a counter, Levelling, Kitchen worktop or sink

Page 15

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570-

600

820

450

IN04

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two front retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

29

Image 15
Contents V a v a j A s S h w Q u i n a d e V a r l o i ç a Contents Hints and tips Important safety informationDescription of the appliance Programme selection push buttons Delay start push buttonIndicator lights Door handle On/Off indicator light On/Off push buttonSetting the water softener Before using your dishwasher for the first timeBefore use Filling with rinse aid Filling with saltTo fill Rinse aidCompact detergents with enzymes Adjusting the doseIf using powder detergents proceed as follows Use of detergentUsing your appliance Washing programmes Operating sequence Maintenance and cleaning Something not working SolutionDrying Service and spare partsHints for test centres Protection against floodingWater outlet hose connection Installation instructionsWater supply connections Electrical connectionProceed as follows Fitting under a counterLevelling Kitchen worktop or sinkElectrolux Group . The world’s No choice 01/02