Electrolux ESL 46510 Care and cleaning, Installation, Frost precautions, Water connection

Page 3

or make a hole in the bottom of the appli- ance.

Do not fill the rinse aid dispenser with other products than the rinse aid, (dish- washer cleaning agent, liquid detergent). This can cause damage to the appliance.

Make sure that the spray arms can move freely before you start a washing pro- gramme.

The appliance can release hot steam if you open the door while a washing pro- gramme operates. There is a risk of skin burns.

Do not remove the dishes from the appli- ance until the washing programme is completed.

Care and cleaning

Before you clean the appliance, deacti- vate it and disconnect the mains plug from the mains socket.

Do not use flammable products or prod- ucts that can cause corrosion.

Do not use the appliance without the fil- ters. Make sure that the installation of the filters is correct. An incorrect installation causes unsatisfactory washing results and damage to the appliance.

Do not use spray water or steam to clean the appliance. Risk of electrical shock and damage to the appliance.

Installation

Make sure that the appliance is not dam- aged. Do not install or connect a dam- aged appliance, contact the supplier.

Remove all packaging before you install and use the appliance.

Only a qualified person must do the elec- trical connection, the plumbing and the installation of the appliance. This to pre- vent the risks of structural damage or in- jury.

Make sure that the mains plug is discon- nected from the mains socket during in- stallation.

Do not drill into the sides of the appliance to prevent damage to hydraulic compo- nents and electrical components.

Important!Obey the instructions in the template supplied with the appliance:

To install the appliance.

To assemble the door panel.

electrolux 3

To connect to the water supply and drain.

Make sure that the appliance is installed below and adjacent to safe structures.

Frost precautions

Do not install the appliance where the temperature is less than 0 °C.

The manufacturer is not responsible for frost damage.

Water connection

Use new hoses to connect the appliance to the water supply. Do not use used ho- ses.

Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose.

Make sure not to squash or cause dam- age to the water hoses when you install the appliance.

Make sure that the water couplings are tight to prevent a water leakage.

The first time you use the appliance, make sure that the hoses do not have water leaks.

The water inlet hose has a safety valve and a double sheath with an inner mains cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the water inlet hose, the safety valve interrupts the flow of water.

Be careful when you connect the water inlet hose:

Do not put the water inlet hose or the safety valve in water.

If the water inlet hose or the safety valve are damaged, immediately dis- connect the mains plug from the mains socket.

Contact the service centre to replace the water inlet hose with safety valve.

Warning! Dangerous voltage.

Image 3
Contents Dishwasher Safety Information ContentsWater connection Care and cleaningInstallation Frost precautionsService centre Electrical connectionTo discard the appliance Visual signal Product DescriptionControl Panel Programme buttons Reset buttonOn/off button DisplayTo activate the acoustic signals again, do steps 1 through Setting the Water SoftenerAcoustic signals Deactivating the acoustic signalsUSE of Dishwasher Salt Manual adjustmentElectronic adjustment How to fill the salt containerUse of rinse aid Adjust the rinse aid dosageUSE of Detergent and Rinse AID Use of detergentHints and tips Multitab FunctionLoading Cutlery and Dishes To activate the multitab functionSetting and Starting a Washing Programme Consumption values Washing ProgrammesWhat to do IF… Care and CleaningMalfunction Possible cause Washing results and drying results are not satisfactoryActivating the rinse aid dispenser Technical DataEnvironment Concerns Electrolux Electrolux Electrolux 117932350-A-102011

ESL 46510 specifications

The Electrolux ESL 46510 is a highly regarded appliance in the world of dishwashers, combining advanced technology with user-friendly features to enhance the dishwashing experience. Its sleek design and practical functionalities make it a popular choice for modern kitchens.

One of the standout features of the ESL 46510 is its excellent energy efficiency. It operates within the A++ energy rating, which signifies low energy consumption without compromising on performance. This not only contributes to lowering electricity bills but also makes it an environmentally friendly option for households looking to reduce their carbon footprint.

In terms of washing performance, the ESL 46510 boasts a powerful water jet system that effectively cleans dishes, pots, and pans. With multiple wash programs, including Eco, Auto, Intensive, and Quick settings, users can select the most suitable option depending on the load and level of soil. The Auto program, which adjusts the washing intensity based on the dirtiness of the dishes, is particularly advantageous for busy households.

The dishwasher features a spacious interior that can accommodate up to 13 place settings, making it ideal for families or those who frequently entertain guests. The adjustable upper basket and foldable plate supports provide flexibility in loading various items, from large pots to delicate glassware, ensuring optimal use of space.

Noise level is another important consideration for many householders, and the ESL 46510 operates at a surprisingly quiet 44 dB, making it one of the quieter models on the market. This allows users to run the dishwasher during the night or while entertaining without disruptive noise.

The built-in Salt and Rinse Aid indicators alert users when it's time to refill, ensuring that the machine maintains optimal performance. Additionally, the dishwasher is equipped with an anti-flood system which enhances safety by detecting potential leaks and preventing water overflow.

Overall, the Electrolux ESL 46510 stands out due to its combination of energy efficiency, versatile wash programs, quiet operation, and spacious design. With its user-friendly controls and innovative features, it is a reliable addition to any kitchen, providing convenience and high-quality cleaning results with every load. This model exemplifies the commitment of Electrolux to blending functionality with modern design in appliance technology.