Electrolux 86070 VI manual Technical data

Page 36

Technical data

Capacity:

12 place settings including serving dishes

Permitted water pres-

1-10 bar (=10-100 N/cm2 = 0.1-1.0 MPa)

sure:

 

Electrical connection:

AC 220 - 240 V, 50 Hz, 10 A; also see the rating plate on the

 

right-hand side of the dishwasher’s interior door .

Total output

2100 - 2300 W

Dishwashers that can be fully integrated

 

 

Dimensions:

820 - 880 x 596 x 546 (H x W x D in mm)

Max. weight:

50 kg

 

 

5 This appliance conforms with the following EU Directives:

–73/23/EEC dated 19.02.1973 Low Voltage Directive

–89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC

–93/68/EEC dated 22.07.1993 CE Marking Directive

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Favorit 86070 Following symbols are used in the text Dear customerContents Safety Prior to using for the first timeChild safety Follow the Instructions for installation and connectionGeneral safety Diagram of appliance Control panelFunction button Sets the water softener Rinse AID Prior to using for the first time Setting the water softenerSetting manually Setting electronically10L Only when using the dishwasher for the first time Adding special saltFilling up with rinse aid Setting the amount of rinse aid required Activating rinse aid inflow when 3in1 function is se- lected Activating/deactivating the acoustic signal Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large Plates Loading / Unloading lower basket and upper basketCups, Glasses, Coffee Service Adjusting the height of the upper basket Raising / Lowering the upper bas- ketAdding detergent Using 3in1 detergents Concentrated detergentsDetergent tablets If you want to use 3in1 products If you do not want to use 3in1 products any moreIf you want to use 4in1 products Selecting the dishwashing cycle Cycle Table Suitable TypeSelecting a programme Starting a dishwashing cycle Interrupting or aborting a dishwashing cycleAborting the dishwashing cycle Setting the Delay Timer To change the time delayCancelling the time delay To change a dishwashing cycleCare and cleaning Switching off the dishwasherRemoving the dishes Cleaning the filters Cleaning the spray arm jets Upper basket spray armWhat to do if Remedying small malfunctionsBottom spray arm Malfunction Possible cause Remedy Indicator Filter is There to remind you to If the dishwashing results are not satisfactory Dishes are still dirtyDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Packaging materialOld appliance Technical data Example loading arrangements Full load Half loadPage Installation and connection instructions Safety information for the installationInstalling the dishwasher Dishwashers that can be fully integratedConnecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressureWater drainage Anti-flood systemDrain hose Extension hosesConnecting systems Electrical connectionFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Japan Singapore Slovenia Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents