Electrolux 55090I Setting the Delay Timer, Switching off the dishwasher, Removing the dishes

24In daily use

Setting the Delay Timer

3With the delay timer you can delay the start of a dishwashing cycle for between 1 and 9 hours.

1.Press the Delay Timer button repeatedly until the multiisplay shows the de sired time delay, for example 6, if the cycle is to start in 6 hours.

2.Select dishwashing cycle.

3.The time remaining to the start of the cycle is continuously displayed (e. g. 6, 5, 4, … etc.).

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the delay timer:

Press the Delay Timer button repeatedly until the Multiisplay goes out. The se lected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dishwashing cycle. First abort the dishwashing cycle, then re delay, lastly select

the new dishwashing cycle.

Switching off the dishwasher

Do not switch off the dishwasher until the indicator for the end of the dish washer cycle is illuminated in the cycle progress display.

1.Press the ON/OFF button. All display indicators will go out.

2.Turn off the water tap.

1 Carefully open the door. Hot steam may escape.

•Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.

•Dishes dry more quickly if you open the door for a moment after the cycle has ended and then leave it slightly open.

Removing the dishes

3It is normal for the inner door and the dispensers to be damp.

•Empty the lower basket first, then the upper basket. This way you avoid drip ping water from the upper basket onto dishes in the lower basket.