![](/images/new-backgrounds/1042619/426195x1.webp)
•A qualified and competent person must do the electrical installation.
•A qualified and competent person must do the plumbing installation.
•Do not change the specifications or modify this product. Risk of injury and damage to the appli- ance.
•Do not use the appliance:
– if the mains cable or water hoses are damaged,
–if the control panel, worktop or plinth area are damaged so that you can get access to the in- ner side of the appliance.
Contact your local Customer Care Centre.
•Do not drill into the sides of the appliance other- wise damage to hydraulic and electrical compo- nents may occur.
Warning! Carefully obey the instructions for electrical and water connections.
Control panel
1Program knob
2Start/cancel button
3Indicator light 'Finished'
4On/off indicator light
5Program marker
Finished
Indicator lights
Comes on when the washing program is completed. It also has the auxiliary functions of alarm if the appliance has a malfunc- tion.
Program knob and on/off indicator light
•To set a washing program, turn the program knob clockwise or anticlockwise. The program marker on the program knob must agree with one of the washing program on the control panel.
–The on/off indicator light comes on (position ON).
•To set the appliance to the off position, turn the program knob until the program marker agrees with the on/off indicator light.
–The on/off indicator light goes off (position OFF).
3