Electrolux SKS31240S0, SKS61240S0 user manual Replacing the lamp, Problem Possible cause Solution

Page 12

12

What to do if…

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Possible cause

 

Solution

 

 

 

 

 

 

 

 

 

The appliance has no power.

 

Connect a different electrical ap-

 

 

 

There is no voltage in the mains

 

pliance to the mains socket.

 

 

 

socket.

 

Contact a qualified electrician.

 

 

 

 

 

 

 

The lamp does not work.

 

The lamp is in stand-by.

 

Close and open the door.

 

 

 

 

 

 

 

 

 

The lamp is defective.

 

Refer to "Replacing the lamp".

 

The compressor operates

 

The temperature is not set cor-

 

Set a higher temperature.

 

continually.

 

rectly.

 

 

 

 

 

 

 

 

 

 

 

The door is not closed correctly.

 

Refer to "Closing the door".

 

 

 

 

 

 

 

 

 

The door has been opened too

 

Do not keep the door open lon-

 

 

 

frequently.

 

ger than necessary.

 

 

 

 

 

 

 

 

 

The product temperature is too

 

Let the product temperature de-

 

 

 

high.

 

crease to room temperature be-

 

 

 

 

 

fore storage.

 

 

 

 

 

 

 

 

 

The room temperature is too

 

Decrease the room temperature.

 

 

 

high.

 

 

 

 

 

 

 

 

 

Water flows on the rear

 

During the automatic defrost-

 

This is correct.

 

plate of the refrigerator.

 

ing process, frost defrosts on

 

 

 

 

 

the rear plate.

 

 

 

Water flows into the re-

 

The water outlet is clogged.

 

Clean the water outlet.

 

frigerator.

 

 

 

 

 

 

 

 

 

 

 

 

 

Products prevent that water

 

Make sure that products do not

 

 

 

flows into the water collector.

 

touch the rear plate.

 

 

 

 

 

 

 

Water flows on the

 

The melting water outlet does

 

Attach the melting water outlet

 

ground.

 

not flow in the evaporative tray

 

to the evaporative tray.

 

 

 

above the compressor.

 

 

 

The temperature in the ap-

 

The temperature regulator is

 

Set a higher temperature.

 

pliance is too low.

 

not set correctly.

 

 

 

 

 

 

 

 

 

The temperature in the ap-

 

The temperature regulator is

 

Set a lower temperature.

 

pliance is too high.

 

not set correctly.

 

 

 

 

 

 

 

 

 

 

 

The door is not closed correctly.

 

Refer to "Closing the door".

 

 

 

The product temperature is too

 

Let the product temperature de-

 

 

 

high.

 

crease to room temperature be-

 

 

 

 

 

fore storage.

 

 

 

 

 

 

 

 

 

Many products are stored at

 

Store less products at the same

 

 

 

the same time.

 

time.

 

 

 

 

 

 

 

 

 

There is no cold air circulation

 

Make sure that there is cold air

 

 

 

in the appliance.

 

circulation in the appliance.

 

 

 

 

 

 

Replacing the lamp

1.Disconnect the mains plug from the mains socket.

2.Remove the screw from the lamp cover.

Image 12
Contents EN Refrigerator Accessories and Consumables For Perfect ResultsContents Safety Information Children and vulnerable people safetyGeneral safety Care and cleaning InstallationDaily use Operation First USE Daily USEHelpful Hints and Tips Care and Cleaning Periodic cleaningHints for freezing Hints for storage of frozen foodDefrosting of the refrigerator Defrosting the freezerWhat to do IF… Periods of non-operationProblem Possible cause Solution Replacing the lampTechnical Data InstallationClosing the door PositioningElectrical connection Door reversibilityInstalling the appliance Ventilation requirementsInstallation Install the appliance in the niche Page Insert the small square Hb into guide Ha Page Environmental Concerns Reversibility of the freezer doorPage Page Page 212720311-00-20052010