Electrolux 241927600, EI15IM55GS manual Inlet Screen Cleaning Every Year, Draining for non-use

Page 19

Maintenance / Storage, Vacation and Moving 19

Inlet Screen Cleaning — Every Year

The solenoid valve inlet screen must be cleaned at least once each year as follows:

1Shut off the water at the water supply valve.

2Pull the unit out to access the back panel.

3Disconnect electrical power to the unit.

4Disconnect the entire hose connector from the water solenoid valve (see Figure 33).

5Use a tooth brush to clean sediment from the inlet screen. DO NOT remove the screen.

6Re-connect the water supply line to the water solenoid valve. Tighten connector securely. Open the water supply valve and check for leakage at the water connection. Make sure the water supply line is not kinked.

7Reconnect power to the unit before re- installing.

8Make sure the drain system is working properly and the drain hose is not pinched or kinked. Pour one gallon of cool, fresh water into the ice bin. The water should drain freely. If your ice maker is equipped with a drain pump, the pump should drain the ice bin.

WATER

CONNECTION

Figure 33

Draining for non-use

If the unit is to be stored, moved or not used for extended periods, it will be necessary to drain the system of water.

WARNING

Electrical Shock Hazard. Disconnect power before servicing. Before operating replace all panels. Failure to do so can result in death or electrical shock.

1Disconnect power from the unit.

2Remove ice from the storage bin.

3Shut off water supply at the main water source.

NOTE

Back panel must be removed prior to disconnecting the water lines.

4Disconnect the inlet and outlet lines to the water valve and allow them to drain.

CAUTION

If the ambient temperature is expected to drop below 45°F (7°C), drain all water from the unit to prevent freezing damage, which is not covered by the warranty.

IMPORTANT

The use of antifreeze or other products of this nature is not necessary and is not recommended.

5Reconnect inlet and outlet lines to the water valve.

6Replace back panel.

7Drain water from the water trough and drain line by removing the overflow tube (see Figure 32).

8Clean the ice maker and storage bin before next use.

9Prop door open to allow for air circulation and prevent mold and mildew.

IMPORTANT

It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first 24 hours of operation when the unit is returned to service.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Use & Care Guide Questions? Finding InformationPlease read and save this guide Keep a record for quick referenceTable of Contents Definitions Important Safety InstructionsSafety Precautions General PrecautionsInstalling the Drain Installation DimensionsGravity Drain Connecting a Drain Pump InstallationPreparing the Site Site PreparationWater Supply Connection Connecting the Water SupplyLeveling the unit LevelingReversing the Door some models Door ReversalDoor Closer Inserts Boss Adjusting the Door Door AdjustmentInitial Start-Up Built-In Installation / Start-UpInstalling a Built-In Blackout Mode not Star-K certifiedIce Cube Thickness OperationNormal Operation Ice Dispenser Operation & CareInterval As Required Ice CubeThickness AdjustmentMaintaining and Cleaning Your Icemaker MaintenanceSpecial Considerations Self Cleaning Every 6 Months Condenser Cleaning Every 3 MonthsOverflow Draining for non-use Inlet Screen Cleaning Every YearBefore You call For Service TroubleshootingTroubleshooting Guide Problem Possible Cause Remedy If Service is requiredConsumer Warranty Information

EI15IM55GS, 241927600 specifications

The Electrolux 241927600, also known as the EI15IM55GS, is a remarkable ice maker that seamlessly blends functionality with convenience. Designed to cater to the needs of modern households and busy lifestyles, this appliance stands out for its impressive array of features and technologies that prioritize performance and user experience.

One of the main features of the EI15IM55GS is its impressive ice production capacity. With the ability to produce up to 28 pounds of clear ice per day, this unit ensures that you will never run out of ice during gatherings, parties, or even regular family use. The clear ice it produces not only looks great but also melts slowly, making it perfect for cocktails, soft drinks, and any beverage of your choice.

This ice maker boasts a compact design, which allows it to fit easily on countertops or in areas where space is limited. Its sleek stainless steel finish adds a touch of elegance, enabling it to blend seamlessly with various kitchen styles. The user-friendly controls and digital display make it easy to operate, allowing you to select the size of your ice cubes according to your preferences.

The EI15IM55GS is equipped with advanced technologies that enhance its performance and energy efficiency. With a built-in water filtration system, it helps to ensure that the ice produced is clean and free from impurities. This system not only improves the taste of the ice but also extends the lifespan of the appliance by minimizing scale build-up.

Additionally, this ice maker features an automatic shut-off function that activates when the ice bin is full. This feature not only saves energy but also prevents overflow, ensuring a hassle-free experience. The quiet operation of the EI15IM55GS adds to its appeal, allowing you to enjoy its benefits without any disruptive noise.

In conclusion, the Electrolux 241927600, EI15IM55GS, is an ideal solution for anyone looking to enhance their beverage experience. Its high production capacity, advanced filtration technology, and compact design make it a highly efficient addition to any kitchen or bar area. With its elegant appearance and user-friendly features, this ice maker is sure to provide convenience and satisfaction for years to come. Investing in the EI15IM55GS means you are choosing reliability, quality, and innovation in your home.
Top Page Image Contents