Maintenance and care
•The hood must always be disconnected from the electricity supply before beginning any maintenance work.
Cleaning the hood
•Clean the outside of the hood using a damp cloth and a mild deter- gent.
•Never use corrosive, abrasive or flammable cleaning products.
•Never insert pointed objects in the motor’s protective grid.
•Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.
•Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents.
•It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
Metal grease filter
•The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal recycling function.
Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks.
Removing the metal grease filter
• First, push the metal grease filter stop backwards, then extract the filter, pulling downwards. Fig. 3.
Hand washing
Soak grease filters for about one hour in hot water with a little
thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry.
Dishwasher Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit
the grease filters when they are dry.
When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur, this does not have any impact on its performance.
• Clean the inner housing using a hot detergent solution only (never
8
use caustic detergents, abrasive powders or brushes).