Filter version
Safety warnings for kitchen unit installer
4
Exhaust vapours are purified by means of an active carbon filter (Optional extra) and directed back into the room.
To insert the active carbon filter, remove the grease filter grid.
Fit the active carbon filter by inserting it first into the upper hooks and then into the lower ones; then lock into position by using the blocking tabs E (fig. 1).
|
| E |
1 | E | E |
The AEG original KLF 60/80 active filter carbon is necessary for the recirculating mode (see paragraph “Special accessories”).
The air outlet must not be connected to chimney flues or combus- tion gas ducts. The air outlet must under no circumstances be connected to ventilation ducts for rooms in which
It is advisable to apply for authorization from the relevant control- ling authority when connecting the outlet to an unused chimney flue or combustion gas duct.
The air outlet installation must comply with the regulations laid down by the relevant authorities.
When the unit is used as an extractor version, a sufficiently large ventilation hole must be provided, with dimensions that are approximately the same as the outlet hole.
National and regional building regulations impose a number of restrictions on using hoods and
The local decree on