Operating Instructions
Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
–at which water hardness the water softener is set.
–when a dishwashing cycle has finished.
–when an error has occurred with the dishwasher.
You can switch on/off the acoustic signal in the following way:
1.Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.
3 | If the only LED indicator illuminated is one that belongs to a pro- |
| gramme button, this means that this dishwashing cycle has been acti- |
vated. The dishwashing cycle must be cancelled (RESET):
Press function buttons 2 and 3 simultaneously for approx. 1 second. The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.
2.Press function buttons 2 and 3 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 3.
The LED indicator for function button 3 will flash. The L display will indicate the current setting:
The Lindicator is flashing: | Acoustic signal activated | |
The Lindicator is not | Acoustic signal deactivated | |
flashing: | ||
| ||
|
|
4.Pressing function button 3 will change the setting.
5.Once the L display is indicating the required setting, press the ON/ OFF button. The setting is now saved.
In Daily Use
•Check the salt and rinse aid levels.
•Load cutlery and dishes into the dishwasher
•Fill with dishwasher detergent
•Select a wash programme suitable for the cutlery and dishes
•Start the wash programme
16